Teknocryl Aqua 2940-00
Air-drying water-borne topcoat (Finland) · EU · manufacturer-sourced
How long does Teknos Teknocryl Aqua 2940-00 take to dry?
Short answer
Finish build-up
Dry to the touch is not ready for furniture
- Wipe or brush the Air-drying water-borne topcoat (Finland) thin with the grain
- Scuff lightly only after the recoat time
- Wait out full cure before heavy use
This product’s stated stages Quoted at 73°F and 50% humidity
- Safe to touch20 minutes
Worth noticing: The manufacturer states only one timing here (safe to touch, 20 minutes); nothing else is inferred.
Common mistake: Setting a drink or a lamp on a finish that is dry but not cured; rings and prints stay.
Plan the next finish coat
Your countdown
Stated times
- Safe to touch20 minutes
From Teknos data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: teknos.com
Conditions & fine print
- Stated conditions: 73°F (23°C) and 50% relative humidity
- Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label.
- Apply at 59°F or above
- Region EU. Formulas can differ between countries; check your container.
- Safe to touch: At 23°C and 50% relative humidity, 30 microns dry, humidity at most 60%.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Teknos Teknocryl Aqua 2940-00
- Variant
- Air-drying water-borne topcoat (Finland)
- Region
- EU
- Listed use
- furniture, interior wood
- Timed stages recorded
- touch
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Technical data sheet 2940-00
Condition attached to the stated time: At 23°C and 50% relative humidity, 30 microns dry, humidity at most 60%.
About this product
A water-borne topcoat touch dry in 20 minutes at 23°C. The sheet gives dry through in 30 minutes at +80°C for forced-drying lines.
Using this specific product
Teknos Teknocryl Aqua 2940-00 is listed here as the Air-drying water-borne topcoat (Finland) version for furniture and interior wood. For finishing wood, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Air-drying water-borne topcoat (Finland); related versions can use different timing.
- For furniture and interior wood, pay particular attention to bare-wood preparation, coat thickness and room airflow.
- At 23°C and 50% relative humidity, 30 microns dry, humidity at most 60%.
How to check readiness
Check a hidden area for tack, odor and marking before handling or use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath.
Avoid this mistake
Cool, humid rooms and heavy coats can extend the usable wait substantially.
Compare with similar products
- Compare with Varathane (Rust-Oleum) Outdoor Water Based Spar Urethane (brush)Touch-dry: 30 min there, 20 min here.
- Compare with Mohawk Finishing Wiping Stain Black (MA240-2247)Touch-dry: 10 min there, 20 min here.
Questions
How long does this product take to dry?
Teknos states: The sheet gives touch dry in 20 minutes. Conditions: At 23°C and 50% relative humidity, 30 microns dry, humidity at most 60%.. These are the manufacturer’s stated times, not a guarantee.
How fast does Teknocryl Aqua 2940-00 touch dry?
The sheet gives 20 minutes at 23°C and 50% humidity.
What affects how long this product takes to dry or cure?
Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label. Follow the product label for your conditions.