Teknos

Teknoclad Nova 3330-42

Water-borne acrylate exterior paint for wood (Finland) · EU · manufacturer-sourced

Check your container: This countdown is for the Water-borne acrylate exterior paint for wood (Finland) variant. Similar-looking versions may have different times.

How long before you can recoat Teknos Teknoclad Nova 3330-42?

Short answer

Ready for another coat: 1 day after application.
Safe to touch: 1 hour after application.
Wood finish

Finish build-up

Dry to the touch is not ready for furniture

  1. Wipe or brush the Water-borne acrylate exterior paint for wood (Finland) thin with the grain
  2. Scuff lightly only after the recoat time
  3. Wait out full cure before heavy use

This product’s stated stages Quoted at 73°F and 50% humidity

  • Safe to touch1 hour
  • Ready for another coat1 day

Worth noticing: Safe to touch at 1 hour; ready for another coat at 1 day.

Common mistake: Setting a drink or a lamp on a finish that is dry but not cured; rings and prints stay.

Plan the next finish coat

When did you wipe on this coat?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to touch1 hour
  • Ready for another coat1 day

From Teknos data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: teknos.com

Conditions & fine print
  • Stated conditions: 73°F (23°C) and 50% relative humidity
  • Paint times are for the stated temperature and humidity. Cold, damp rooms and thick films lengthen them. Follow the current data sheet and label.
  • Apply at 50°F or above
  • Region EU. Formulas can differ between countries; check your container.
  • Safe to touch: At 23°C and 50% relative humidity, 120 microns wet on glass.
  • Ready for another coat: At 23°C and 50% relative humidity.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Teknos Teknoclad Nova 3330-42
Variant
Water-borne acrylate exterior paint for wood (Finland)
Region
EU
Listed use
exterior cladding, primer and topcoat
Timed stages recorded
touch, recoat min
Source checked
2026-10-25

Documentation: Technical data sheet · Technical data sheet 3330-42

Condition attached to the stated time: At 23°C and 50% relative humidity, 120 microns wet on glass.

About this product

An all-in-one exterior acrylic used as primer, intermediate and topcoat. It touch dries in an hour and takes the next coat the following day.

Using this specific product

Teknos Teknoclad Nova 3330-42 is listed here as the Water-borne acrylate exterior paint for wood (Finland) version for exterior cladding and primer and topcoat. For finishing wood, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Water-borne acrylate exterior paint for wood (Finland); related versions can use different timing.
  • For exterior cladding and primer and topcoat, pay particular attention to bare-wood preparation, coat thickness and room airflow.
  • At 23°C and 50% relative humidity, 120 microns wet on glass. At 23°C and 50% relative humidity.

How to check readiness

Check a hidden area for tack, odor and marking before handling or use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required.

Avoid this mistake

Cool, humid rooms and heavy coats can extend the usable wait substantially.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

Teknos states: The sheet gives touch dry in 1 hour. Conditions: At 23°C and 50% relative humidity, 120 microns wet on glass.. The sheet gives overcoating the following day. Conditions: At 23°C and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

When can I overcoat Teknoclad Nova 3330-42?

The sheet gives the following day at 23°C and 50% humidity.

How long until this product is safe to touch?

Teknos states: The sheet gives touch dry in 1 hour. Conditions: At 23°C and 50% relative humidity, 120 microns wet on glass.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Paint times are for the stated temperature and humidity. Cold, damp rooms and thick films lengthen them. Follow the current data sheet and label. Follow the product label for your conditions.

Similar products

All wood finishes