Nordica Eko 3330-17
Water-borne topcoat for dip and flow coating (Finland) · EU · manufacturer-sourced
How long before you can recoat Teknos Nordica Eko 3330-17?
Short answer
Finish build-up
Dry to the touch is not ready for furniture
- Wipe or brush the Water-borne topcoat for dip and flow coating (Finland) thin with the grain
- Scuff lightly only after the recoat time
- Wait out full cure before heavy use
This product’s stated stages Quoted at 73°F and 50% humidity
- Safe to touch40 minutes
- Ready for another coat2 hours
Worth noticing: Safe to touch at 40 minutes; ready for another coat at 2 hours.
Common mistake: Setting a drink or a lamp on a finish that is dry but not cured; rings and prints stay.
Plan the next finish coat
Your countdown
Stated times
- Safe to touch40 minutes
- Ready for another coat2 hours
From Teknos data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: teknos.com
Conditions & fine print
- Stated conditions: 73°F (23°C) and 50% relative humidity
- Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label.
- Region EU. Formulas can differ between countries; check your container.
- Safe to touch: At 23°C and 50% relative humidity.
- Ready for another coat: At 23°C and 50% relative humidity.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Teknos Nordica Eko 3330-17
- Variant
- Water-borne topcoat for dip and flow coating (Finland)
- Region
- EU
- Listed use
- factory-finished wood, dip and flow coating
- Timed stages recorded
- touch, recoat min
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Technical data sheet 3330-17
Condition attached to the stated time: At 23°C and 50% relative humidity.
About this product
A topcoat for dip, flow and Vacumat lines, overcoated in about 2 hours. The sheet gives 15 to 30°C as the optimum for product and room.
Using this specific product
Teknos Nordica Eko 3330-17 is listed here as the Water-borne topcoat for dip and flow coating (Finland) version for factory-finished wood and dip and flow coating. For finishing wood, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Water-borne topcoat for dip and flow coating (Finland); related versions can use different timing.
- For factory-finished wood and dip and flow coating, pay particular attention to bare-wood preparation, coat thickness and room airflow.
- At 23°C and 50% relative humidity.
How to check readiness
Check a hidden area for tack, odor and marking before handling or use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required.
Avoid this mistake
Cool, humid rooms and heavy coats can extend the usable wait substantially.
Compare with similar products
- Compare with Varathane Amber PolyurethaneRecoat: 2 h there, 2 h here.
- Compare with Varathane (Rust-Oleum) Classic Water Based Wood StainRecoat: 2 h there, 2 h here.
Questions
How long before you can recoat this product?
Teknos states: The sheet gives touch dry in 40 minutes. Conditions: At 23°C and 50% relative humidity.. The sheet gives overcoating after about 2 hours. Conditions: At 23°C and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.
How long before overcoating Nordica Eko 3330-17?
The sheet gives about 2 hours at 23°C and 50% humidity.
How long until this product is safe to touch?
Teknos states: The sheet gives touch dry in 40 minutes. Conditions: At 23°C and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label. Follow the product label for your conditions.