Teknos

Teknocraft Aqua Filler 9250-00

Water-borne filler for interior wood (Finland) · EU · manufacturer-sourced

Check your container: This countdown is for the Water-borne filler for interior wood (Finland) variant. Similar-looking versions may have different times.

How long before you can recoat Teknos Teknocraft Aqua Filler 9250-00?

Short answer

Ready for another coat: 2 hours after application.
Safe to touch: 1 hour after application.
Wood finish

Finish build-up

Dry to the touch is not ready for furniture

  1. Wipe or brush the Water-borne filler for interior wood (Finland) thin with the grain
  2. Scuff lightly only after the recoat time
  3. Wait out full cure before heavy use

This product’s stated stages Quoted at 73°F and 50% humidity

  • Safe to touch1 hour
  • Ready to sand2 hours
  • Ready for another coat2 hours
  • Fully dry1 day

Worth noticing: Safe to touch at 1 hour; fully dry at 1 day.

Common mistake: Setting a drink or a lamp on a finish that is dry but not cured; rings and prints stay.

Plan the next finish coat

When did you wipe on this coat?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to touch1 hour
  • Ready to sand2 hours
  • Ready for another coat2 hours
  • Fully dry1 day

From Teknos data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: teknos.com

Conditions & fine print
  • Stated conditions: 73°F (23°C) and 50% relative humidity
  • Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label.
  • Apply at 59°F or above
  • Region EU. Formulas can differ between countries; check your container.
  • Safe to touch: At 23°C and 50% relative humidity, 100 g wet per square metre.
  • Ready to sand: At 23°C and 50% relative humidity.
  • Ready for another coat: It is 12 hours with a solvent-borne topcoat.
  • Fully dry: At 23°C and 50% relative humidity.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Teknos Teknocraft Aqua Filler 9250-00
Variant
Water-borne filler for interior wood (Finland)
Region
EU
Listed use
furniture filler, cabinet pores, interior wood
Timed stages recorded
touch, sand, recoat min, full dry
Source checked
2026-10-25

Documentation: Technical data sheet · Technical data sheet 9250-00

Condition attached to the stated time: At 23°C and 50% relative humidity, 100 g wet per square metre.

About this product

A water-borne filler whose overcoat time depends on the topcoat: 2 hours for water-borne and 12 for solvent-borne. Sanding is ready at 2 hours.

Using this specific product

Teknos Teknocraft Aqua Filler 9250-00 is listed here as the Water-borne filler for interior wood (Finland) version for furniture filler, cabinet pores, and interior wood. For finishing wood, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Water-borne filler for interior wood (Finland); related versions can use different timing.
  • For furniture filler, cabinet pores, and interior wood, pay particular attention to bare-wood preparation, coat thickness and room airflow.
  • At 23°C and 50% relative humidity, 100 g wet per square metre. At 23°C and 50% relative humidity. It is 12 hours with a solvent-borne topcoat.

How to check readiness

Check a hidden area for tack, odor and marking before handling or use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. The sheet gives fit for sanding after 2 hours. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required.

Avoid this mistake

Cool, humid rooms and heavy coats can extend the usable wait substantially.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

Teknos states: The sheet gives touch dry in 60 minutes. Conditions: At 23°C and 50% relative humidity, 100 g wet per square metre.. The sheet gives fit for sanding after 2 hours. Conditions: At 23°C and 50% relative humidity.. The sheet gives overcoating with a water-borne topcoat after 2 hours. Conditions: It is 12 hours with a solvent-borne topcoat.. The sheet gives through dry in 24 hours. Conditions: At 23°C and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

How long before sanding Teknocraft Aqua Filler?

The sheet gives 2 hours at 23°C and 50% humidity.

How long before I can sand this product?

Teknos states: The sheet gives fit for sanding after 2 hours. Conditions: At 23°C and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

How long until this product is safe to touch?

Teknos states: The sheet gives touch dry in 60 minutes. Conditions: At 23°C and 50% relative humidity, 100 g wet per square metre.. These are the manufacturer’s stated times, not a guarantee.

How long until this product is fully dry?

Teknos states: The sheet gives through dry in 24 hours. Conditions: At 23°C and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label. Follow the product label for your conditions.

Similar products

All wood finishes