ACTION HUB
How long before you can sand a coating or repair?
Use the milestone for sanding, not a generic dry-to-touch time. The table below is built only from numeric times in manufacturer documents already recorded in our catalog.
Important: Shortest does not mean interchangeable. Product type, surface, conditions and intended use still have to match your project.
Manufacturer-stated times
| Product | Manufacturer-stated minimum | Condition/source |
|---|---|---|
| Bondo (3M) Bondo Wood Filler Two-part with hardener | 15 minutes | See product page |
| Bondo (3M) Bondo Glazing and Spot Putty 16 oz (00651) | 20 minutes | See product page |
| Bondo (3M) Bondo Original Filler Two-part (with cream hardener) | 20 minutes | See product page |
| Dakine P-Tex Repair Sticks Ski and snowboard base repair | 30 minutes | At manufacturer-stated conditions; temperature, humidity and film thickness can change drying time. |
| Minwax High Performance Wood Filler Two-part | 30 minutes | See product page |
| DAP DRYDEX Dry Time Indicator Spackling Pink to white | 1 hours | Depends on temperature, humidity and depth of fill |
| DAP FAST DRY High Strength Spackling with DRYDEX Pink to white | 1 hours | Repairs 1 in. × 1/8 in. deep or smaller |
| DAP Presto Patch Multi-Purpose Patching Compound Ready to use | 1 hours | Depends on temperature, humidity and depth of fill |
| Devcon Plastic Steel 5-Minute Putty (SF) Two-part putty (all sizes) | 1 hours | 75°F (24°C) |
| J-B Weld KwikWood Epoxy Putty Putty stick, tan, 1 oz | 1 hours | See product page |
| Zinsser (Rust-Oleum) Bulls Eye Shellac Clear / amber | 1 hours | 70°F and 50% RH |
| Bondo (3M) Bondo Fiberglass Resin Liquid resin with hardener | 2 hours | See product page |
| Ding All Super Repair Kit Polyester surfboard repair | 2 hours | At manufacturer-stated conditions; temperature, humidity and film thickness can change drying time. |
| Minwax Polycrylic Protective Finish Water-based (all sheens) | 2 hours | 77°F and 50% RH with good ventilation |
| Minwax Stainable Wood Filler Natural | 2 hours | Shallow repairs about 2 hours |
| DAP Plastic Wood All Purpose Wood Filler Natural | 3 hours | Fills up to 1/8 in. deep |
| Devcon Plastic Steel Putty (A) Two-part putty (all sizes) | 4 hours | See product page |
| Smooth-On XTC-3D High Performance Coating Two-part epoxy coating | 4 hours | At manufacturer-stated conditions; temperature, humidity and film thickness can change drying time. |
| Ding All Epoxy Repair Kit Epoxy surfboard repair | 6 hours | At manufacturer-stated conditions; temperature, humidity and film thickness can change drying time. |
| Loctite (Henkel) Epoxy Weld Bonding Compound Carded tubes, 2 x 1 oz (Item 1360700) | 16 hours | See product page |
| DAP FAST 'N FINAL Lightweight Spackling White | 1 days | See product page |
| DAP PATCH-N-PAINT Lightweight Spackling White | 1 days | See product page |
| Interlux Pre-Kote Undercoat One-part undercoat | 1 days | Substrate temperature |
| Tamiya Airbrush Cleaner Used as Cement Styrene solvent cement | 1 days | At manufacturer-stated conditions; temperature, humidity and film thickness can change drying time. |
| Tamiya Extra Thin Cement Capillary-action plastic cement | 1 days | At manufacturer-stated conditions; temperature, humidity and film thickness can change drying time. |
| DAP Plastic Wood-X Wood Filler with DryDex Natural (pink when wet) | 1.5 days | Shallow (≤ 1/8 in.): 2–6 hours; deep (≥ 1/4 in.): 36 hours |
How to use this table
Open the exact product page to see the variant, source wording, stated conditions and other milestones. A minimum time is the earliest stated threshold under the manufacturer’s conditions—not a guarantee for colder, wetter, thicker or poorly ventilated applications.
Related checks
- Confirm the exact formula and region on your container.
- Use the clock for your next action rather than touch-dry time.
- Check temperature, humidity, thickness and substrate notes.
- When the manufacturer provides no correction factor, wait longer and verify physical readiness.