DAP

FAST DRY High Strength Spackling with DRYDEX

Pink to white · US · not yet reviewed

Short answer

Paint-ready: 15 minutes to 1 hour after application.
Ready to sand: 1 hour after application.
Wait until the spackling turns from pink to white before sanding or painting.

Start the clock

When did you apply it?
Outdoors, temperature
Where?
Thickness

Stated times

  • Paint-ready15 minutes to 1 hour
  • Ready to sand1 hour

From DAP data sheet · checked 2026-10-24. Anything not listed isn’t stated by the manufacturer.

Conditions & fine print
  • Stated conditions: Repairs 1 in. × 1/8 in. deep or smaller
  • The fast times apply to small repairs (1 in. wide, 1/8 in. deep or less). Temperature, humidity and depth all change them.
  • Temperature range: 40°F to —°F
  • Region US. Formulas can differ between countries; check your container.
  • Paint-ready: Repairs 1 in. × 1/8 in. deep or smaller
  • Ready to sand: Repairs 1 in. × 1/8 in. deep or smaller
  • Entered from the manufacturer source; second review pending. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Questions

How long before you can paint FAST DRY High Strength Spackling with DRYDEX?

DAP states: May be painted with latex paint in as little as 15 minutes on small repairs; turns white when ready (about 15 minutes to 1 hour). Conditions: Repairs 1 in. × 1/8 in. deep or smaller. This is the manufacturer’s stated time, not a guarantee.

How long before FAST DRY High Strength Spackling with DRYDEX is ready to sand?

DAP states: If sanding, allow approximately 60 minutes for repairs 1 in. × 1/8 in. deep or smaller. Conditions: Repairs 1 in. × 1/8 in. deep or smaller. This is the manufacturer’s stated time, not a guarantee.

Similar products

All paints, primers and patching