DAP

Flexible Floor Patch and Leveler

Ready to use · US · not yet reviewed

Check your container: This countdown is for the Ready to use variant. Similar-looking versions may have different times.

How long does DAP Flexible Floor Patch and Leveler take to dry?

Short answer

Fully dry: 6 hours after application.
Paint, primer & patch

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Ready to use directions and prepare for floors, concrete floors, and subfloor.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Calculate the next coating step

When did this coat go on?
Conditions that affect drying
Where?
Thickness

Stated times

  • Fully dry6 hours

From DAP data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: dap.com

Conditions & fine print
  • Stated conditions: Depends on temperature, humidity and depth of repair
  • Not intended as a finished traffic surface. Ready for floor covering when a coin leaves no indentation. Dry time increases with thickness, cooler temperatures and higher moisture. Apply between 40°F and 90°F.
  • Temperature range: 40°F to 90°F
  • Region US. Formulas can differ between countries; check your container.
  • Fully dry: Depends on temperature, humidity and depth of repair
  • Entered from the manufacturer source; second review pending. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Using this specific product

DAP Flexible Floor Patch and Leveler is listed here as the Ready to use version for floors, concrete floors, and subfloor. For painting, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Ready to use; related versions can use different timing.
  • For floors, concrete floors, and subfloor, pay particular attention to surface preparation, coat thickness and ventilation.
  • Depends on temperature, humidity and depth of repair.

How to check readiness

Test an inconspicuous area for firmness and blocking before normal use. Dry time: 6 hours.

Avoid this mistake

Recoating too early can trap solvent or water; waiting much longer may require scuffing under the label directions.

Questions

How long does this product take to dry?

DAP states: Dry time: 6 hours. Conditions: Depends on temperature, humidity and depth of repair. These are the manufacturer’s stated times, not a guarantee.

How long does this product take to fully cure?

DAP states: Dry time: 6 hours. Conditions: Depends on temperature, humidity and depth of repair. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Not intended as a finished traffic surface. Ready for floor covering when a coin leaves no indentation. Dry time increases with thickness, cooler temperatures and higher moisture. Apply between 40°F and 90°F. Application temperature: 40°F to 90°F. Follow the product label for your conditions.

Similar products

All paints, primers and patching