Bulls Eye Shellac
Clear / amber · US · not yet reviewed
Short answer
Ready for another coat: 1 hour after application.
Full cure: 1 day after application.
Start the clock
Your countdown
Stated times
- Safe to touch30 minutes
- Ready to sand1 hour
- Ready for another coat1 hour
- Full cure1 day
From Zinsser (Rust-Oleum) data sheet · checked 2026-10-24. Anything not listed isn’t stated by the manufacturer.
Conditions & fine print
- Stated conditions: 70°F and 50% relative humidity
- Allow more time at cooler temperatures. Apply below 85% humidity. Not recommended as a sealer under polyurethane.
- Temperature range: 0°F to 90°F
- Region US. Formulas can differ between countries; check your container.
- Safe to touch: 70°F and 50% RH
- Ready to sand: 70°F and 50% RH
- Ready for another coat: 70°F and 50% RH
- Full cure: 70°F and 50% RH
- Entered from the manufacturer source; second review pending. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Questions
How long before Bulls Eye Shellac is ready for another coat?
Zinsser (Rust-Oleum) states: Can be recoated in less than 1 hour. Conditions: 70°F and 50% RH. This is the manufacturer’s stated time, not a guarantee.
How long before Bulls Eye Shellac is full cure?
Zinsser (Rust-Oleum) states: Full cure: 24 hours. Conditions: 70°F and 50% RH. This is the manufacturer’s stated time, not a guarantee.