Plastic Wood-X Wood Filler with DryDex
Natural (pink when wet) · US · not yet reviewed
Short answer
Paint-ready: 1 day 12 hours after application (shorter only under the manufacturer’s stated conditions — see below).
Ready to sand: 1 day 12 hours after application (shorter only under the manufacturer’s stated conditions — see below).
Wait until the filler turns from pink to natural before sanding.
Start the clock
Your countdown
Stated times
- Ready to sand1 day 12 hours*
- Paint-ready1 day 12 hours*
* Shorter only under the manufacturer’s stated conditions.
From DAP data sheet · checked 2026-10-24. Anything not listed isn’t stated by the manufacturer.
Conditions & fine print
- Stated conditions: Depends on fill depth
- Dry time depends on fill depth, temperature and humidity. Fill deep holes in thin layers. Seal exterior repairs before they get wet.
- Temperature range: 40°F to 100°F
- Region US. Formulas can differ between countries; check your container.
- Ready to sand: Shallow (≤ 1/8 in.): 2–6 hours; deep (≥ 1/4 in.): 36 hours
- Paint-ready: Same as sanding time for latex paint
- Entered from the manufacturer source; second review pending. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Questions
How long before you can paint Plastic Wood-X Wood Filler with DryDex?
DAP states: Latex paint can be applied right after sanding; oil-based paint after 12 hours. Conditions: Same as sanding time for latex paint. This is the manufacturer’s stated time, not a guarantee.
How long before Plastic Wood-X Wood Filler with DryDex is ready to sand?
DAP states: About 2 to 6 hours for shallow fills up to 1/8 in.; up to 36 hours for deep fills 1/4 in. and over. Conditions: Shallow (≤ 1/8 in.): 2–6 hours; deep (≥ 1/4 in.): 36 hours. This is the manufacturer’s stated time, not a guarantee.
Similar products
- KILZ KILZ ORIGINAL Interior Oil-Based PrimerWhite (oil-based) · Paint, primer & patch · USPaint-ready 1 hour
- KILZ KILZ 2 ALL-PURPOSE Interior/Exterior PrimerWhite (water-based) · Paint, primer & patch · USPaint-ready 1 hour
- Zinsser (Rust-Oleum) Bulls Eye 1-2-3 PrimerWhite (water-based; brush/roll/spray) · Paint, primer & patch · USPaint-ready 1 hour