Sikkens

Rubbol WF 378

Exterior gloss paint · INTL · manufacturer-sourced

Check your container: This countdown is for the Exterior gloss paint variant. Similar-looking versions may have different times.

How long before you can recoat Sikkens Rubbol WF 378?

Short answer

Ready for another coat: 4–6 hours after application.
Safe to touch: 30 minutes to 1 hour after application.
Paint, primer & patch

Coat-by-coat plan

Touch-dry, recoat and washable are three different dates

  1. Cut in and roll the Exterior gloss paint in even coats
  2. Wait for the recoat time, not touch-dry
  3. Hold off scrubbing until the cure time

This product’s stated stages Quoted at 73°F

  • Safe to touch30 minutes to 1 hour
  • Ready to sand1–4 hours
  • Ready for another coat4–6 hours

Worth noticing: Safe to touch at 30 minutes to 1 hour; ready for another coat at 4–6 hours.

Common mistake: Closing the door or hanging pictures once the wall feels dry, long before the film has hardened.

Paint, primer & patch

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Exterior gloss paint directions and prepare for exterior joinery and gloss.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Plan the next coat

When did this coat go on?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to touch30 minutes to 1 hour
  • Ready to sand1–4 hours
  • Ready for another coat4–6 hours

From Sikkens data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: sikkens.com

Conditions & fine print
  • Stated conditions: 73°F (23°C)
  • Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label.
  • Temperature range: 59°F to 77°F
  • Region INTL. Formulas can differ between countries; check your container.
  • Safe to touch: The source gives no conditions for this time.
  • Ready to sand: The source gives no conditions for this time.
  • Ready for another coat: The summary gives 1 to 6 hours across conditions.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Sikkens Rubbol WF 378
Variant
Exterior gloss paint
Region
INTL
Listed use
exterior joinery, gloss
Timed stages recorded
touch, sand, recoat min
Source checked
2026-10-25

Documentation: Technical data sheet · Product data, issued 2017-08-26

Condition attached to the stated time: The source gives no conditions for this time.

About this product

A joinery paint where the sheet gives two recoat answers: about 4 to 6 hours at standard conditions and 1 to 6 hours across a wider range.

Using this specific product

Sikkens Rubbol WF 378 is listed here as the Exterior gloss paint version for exterior joinery and gloss. For painting, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Exterior gloss paint; related versions can use different timing.
  • For exterior joinery and gloss, pay particular attention to surface preparation, coat thickness and ventilation.
  • The source gives no conditions for this time. The summary gives 1 to 6 hours across conditions.

How to check readiness

Test an inconspicuous area for firmness and blocking before normal use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. The sheet gives sandable after 60 minutes to 4 hours. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required.

Avoid this mistake

Recoating too early can trap solvent or water; waiting much longer may require scuffing under the label directions.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

Sikkens states: The sheet gives dust dry in 30 to 60 minutes. Conditions: The source gives no conditions for this time.. The sheet gives sandable after 60 minutes to 4 hours. Conditions: The source gives no conditions for this time.. The sheet gives recoating after about 4 to 6 hours at 23°C and 50% humidity. Conditions: The summary gives 1 to 6 hours across conditions.. These are the manufacturer’s stated times, not a guarantee.

Why does Rubbol WF 378 list two recoat times?

The sheet gives about 4 to 6 hours at 23°C and 50% humidity, and 1 to 6 hours across varying conditions.

How long before I can sand this product?

Sikkens states: The sheet gives sandable after 60 minutes to 4 hours. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

How long until this product is safe to touch?

Sikkens states: The sheet gives dust dry in 30 to 60 minutes. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label. Follow the product label for your conditions.

Similar products

All paints, primers and patching