Dulux Trade

Weathershield Smooth Masonry

Exterior masonry paint (UK) · GB · manufacturer-sourced

Check your container: This countdown is for the Exterior masonry paint (UK) variant. Similar-looking versions may have different times.

How long before you can recoat Dulux Trade Weathershield Smooth Masonry?

Short answer

Ready for another coat: 2–4 hours after application.
Safe to touch: 30 minutes after application.
Paint, primer & patch

Coat-by-coat plan

Touch-dry, recoat and washable are three different dates

  1. Cut in and roll the Exterior masonry paint (UK) in even coats
  2. Wait for the recoat time, not touch-dry
  3. Hold off scrubbing until the cure time

This product’s stated stages Quoted at 68°F

  • Safe to touch30 minutes
  • Ready for another coat2–4 hours

Worth noticing: Safe to touch at 30 minutes; ready for another coat at 2–4 hours.

Common mistake: Closing the door or hanging pictures once the wall feels dry, long before the film has hardened.

Paint, primer & patch

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Exterior masonry paint (UK) directions and prepare for exterior masonry and render painting.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Plan the next coat

When did this coat go on?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to touch30 minutes
  • Ready for another coat2–4 hours

From Dulux Trade data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: shopify.com

Conditions & fine print
  • Stated conditions: 68°F (20°C)
  • Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label.
  • Apply at 45°F or above
  • Region GB. Formulas can differ between countries; check your container.
  • Safe to touch: The source gives no conditions for this time.
  • Ready for another coat: Do not apply below 7°C.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Dulux Trade Weathershield Smooth Masonry
Variant
Exterior masonry paint (UK)
Region
GB
Listed use
exterior masonry, render painting
Timed stages recorded
touch, recoat min
Source checked
2026-10-25

Documentation: Technical data sheet copy · Data sheet copy, (c)2021

Condition attached to the stated time: The source gives no conditions for this time.

About this product

An exterior masonry paint that is touch dry in 30 minutes and takes its second coat after 2 to 4 hours. The sheet bars application below 7°C.

Using this specific product

Dulux Trade Weathershield Smooth Masonry is listed here as the Exterior masonry paint (UK) version for exterior masonry and render painting. For painting, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Exterior masonry paint (UK); related versions can use different timing.
  • For exterior masonry and render painting, pay particular attention to surface preparation, coat thickness and ventilation.
  • The source gives no conditions for this time. Do not apply below 7°C.

How to check readiness

Test an inconspicuous area for firmness and blocking before normal use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required.

Avoid this mistake

Recoating too early can trap solvent or water; waiting much longer may require scuffing under the label directions.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

Dulux Trade states: The sheet gives touch dry at 30 minutes. Conditions: The source gives no conditions for this time.. The sheet gives recoating after 2 to 4 hours. Conditions: Do not apply below 7°C.. These are the manufacturer’s stated times, not a guarantee.

What is the lowest temperature for Weathershield Smooth Masonry?

The sheet says do not apply below 7°C.

How long until this product is safe to touch?

Dulux Trade states: The sheet gives touch dry at 30 minutes. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label. Follow the product label for your conditions.

Similar products

All paints, primers and patching