BEHR

ULTRA Ceiling Paint & Primer

Flat · US · not yet reviewed

Check your container: This countdown is for the Flat variant. Similar-looking versions may have different times.

How long before recoating BEHR ULTRA Ceiling Paint & Primer?

Short answer

Ready for another coat: 2 hours after application.
Safe to touch: 1 hour after application.
Paint, primer & patch

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Flat directions and prepare for ceilings, drywall, and popcorn ceilings.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Calculate the next coating step

When did this coat go on?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to touch1 hour
  • Ready for another coat2 hours

From BEHR product page · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: behr.com

Conditions & fine print
  • Stated conditions: 77°F (25°C) and 50% relative humidity
  • Dry times are longer in cooler temperatures and higher humidity. Apply when surface and air temperatures are 50°F to 90°F. No full cure time is published.
  • Temperature range: 50°F to 90°F
  • Region US. Formulas can differ between countries; check your container.
  • Safe to touch: 77°F (25°C) and 50% humidity
  • Ready for another coat: 77°F (25°C) and 50% humidity
  • Entered from the manufacturer source; second review pending. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Using this specific product

BEHR ULTRA Ceiling Paint & Primer is listed here as the Flat version for ceilings, drywall, and popcorn ceilings. For painting, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Flat; related versions can use different timing.
  • For ceilings, drywall, and popcorn ceilings, pay particular attention to surface preparation, coat thickness and ventilation.
  • 77°F (25°C) and 50% humidity.

How to check readiness

Test an inconspicuous area for firmness and blocking before normal use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required.

Avoid this mistake

Recoating too early can trap solvent or water; waiting much longer may require scuffing under the label directions.

Questions

How long does this product take to dry?

BEHR states: Recoat: 2 hours. Conditions: 77°F (25°C) and 50% humidity. Dry to touch: 1 hour. Conditions: 77°F (25°C) and 50% humidity. These are the manufacturer’s stated times, not a guarantee.

How long should I wait between coats of this product?

BEHR states: Recoat: 2 hours. Conditions: 77°F (25°C) and 50% humidity. These are the manufacturer’s stated times, not a guarantee.

How long until this product is safe to touch or handle?

BEHR states: Dry to touch: 1 hour. Conditions: 77°F (25°C) and 50% humidity. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Dry times are longer in cooler temperatures and higher humidity. Apply when surface and air temperatures are 50°F to 90°F. No full cure time is published. Application temperature: 50°F to 90°F. Follow the product label for your conditions.

Similar products

All paints, primers and patching