Sikkens

Cetol SRD Translucent

Exterior translucent wood finish · US · manufacturer-sourced

Check your container: This countdown is for the Exterior translucent wood finish variant. Similar-looking versions may have different times.

How long does Sikkens Cetol SRD Translucent take to dry?

Short answer

Safe to touch: 6 hours after application.
Light foot traffic: 2 days after application.
Wood finish

Finish build-up

Dry to the touch is not ready for furniture

  1. Wipe or brush the Exterior translucent wood finish thin with the grain
  2. Scuff lightly only after the recoat time
  3. Wait out full cure before heavy use

This product’s stated stages Quoted at 70°F

  • Safe to touch6 hours
  • Rain-ready1 day
  • Light foot traffic2 days
  • Furniture back3 days
  • Curing period7 days

Worth noticing: Safe to touch at 6 hours; curing period at 7 days.

Common mistake: Setting a drink or a lamp on a finish that is dry but not cured; rings and prints stay.

Plan the next finish coat

When did you wipe on this coat?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to touch6 hours
  • Light foot traffic2 days
  • Return furniture3 days
  • Rain-safe1 day
  • Curing period complete7 days

From Sikkens data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: sikkens.com

Conditions & fine print
  • Stated conditions: 70°F (21°C)
  • Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label.
  • Temperature range: 50°F to 90°F
  • Region US. Formulas can differ between countries; check your container.
  • Safe to touch: At 21°C (70°F). The sheet doubles times above 50% humidity.
  • Light foot traffic: At 21°C (70°F).
  • Return furniture: At 21°C (70°F).
  • Rain-safe: At 21°C (70°F).
  • Curing period complete: At 21°C (70°F).
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Sikkens Cetol SRD Translucent
Variant
Exterior translucent wood finish
Region
US
Listed use
decks, siding, log homes
Timed stages recorded
touch, light foot, furniture, rain ready, cure period
Source checked
2026-10-25

Documentation: Technical data sheet · Technical data sheet

Condition attached to the stated time: At 21°C (70°F). The sheet doubles times above 50% humidity.

About this product

A deck finish with a clean ladder of waits: 24 hours before rain, 48 before foot traffic, 72 before furniture and 7 days before cleaning. Do not apply if lower temperatures are expected within 3 to 6 hours.

Using this specific product

Sikkens Cetol SRD Translucent is listed here as the Exterior translucent wood finish version for decks, siding, and log homes. For finishing wood, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Exterior translucent wood finish; related versions can use different timing.
  • For decks, siding, and log homes, pay particular attention to bare-wood preparation, coat thickness and room airflow.
  • At 21°C (70°F). The sheet doubles times above 50% humidity. At 21°C (70°F).

How to check readiness

Check a hidden area for tack, odor and marking before handling or use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Try a protected edge first and avoid turning, dragging or concentrated loads. The sheet gives 72 hours before replacing furniture.

Avoid this mistake

Cool, humid rooms and heavy coats can extend the usable wait substantially.

Compare with similar products

Keep going

Questions

How long does this product take to dry?

Sikkens states: The sheet gives touch dry in 6 hours. Conditions: At 21°C (70°F). The sheet doubles times above 50% humidity.. The sheet gives 48 hours before foot traffic. Conditions: At 21°C (70°F).. The sheet gives 72 hours before replacing furniture. Conditions: At 21°C (70°F).. The sheet gives 24 hours before rain exposure. Conditions: At 21°C (70°F).. The sheet gives 7 days before cleaning. Conditions: At 21°C (70°F).. These are the manufacturer’s stated times, not a guarantee.

When can I walk on a deck finished with Cetol SRD?

The sheet gives 48 hours at 21°C, doubled above 50% humidity.

How long before I can walk on tile set with this product?

Sikkens states: The sheet gives 48 hours before foot traffic. Conditions: At 21°C (70°F).. These are the manufacturer’s stated times, not a guarantee.

How long before this product can get rained on?

Sikkens states: The sheet gives 24 hours before rain exposure. Conditions: At 21°C (70°F).. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label. Follow the product label for your conditions.

Similar products

All wood finishes