Mohawk Finishing

Wiping Stain Black (MA240-2247)

Wiping stain · US · manufacturer-sourced

Check your container: This countdown is for the Wiping stain variant. Similar-looking versions may have different times.

How long before you can recoat Mohawk Finishing Wiping Stain Black (MA240-2247)?

Short answer

Ready for another coat: 1 hour after application.
Safe to touch: 10 minutes after application.
Wood finish

Finish build-up

Dry to the touch is not ready for furniture

  1. Wipe or brush the Wiping stain thin with the grain
  2. Scuff lightly only after the recoat time
  3. Wait out full cure before heavy use

This product’s stated stages Quoted at 77°F and 45% humidity

  • Safe to touch10 minutes
  • Safe to handle20 minutes
  • Ready for another coat1 hour

Worth noticing: Safe to touch at 10 minutes; ready for another coat at 1 hour.

Common mistake: Setting a drink or a lamp on a finish that is dry but not cured; rings and prints stay.

Wood finish

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Wiping stain directions and prepare for wiping stain, black wood stain, and wood stain.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Plan the next finish coat

When did you wipe on this coat?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to touch10 minutes
  • Safe to handle20 minutes
  • Ready for another coat1 hour

From Mohawk Finishing data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: mohawk-finishing.com

Conditions & fine print
  • Stated conditions: 77°F (25°C) and 45% relative humidity
  • Drying times change with temperature, humidity, film build and airflow. Follow the current data sheet.
  • Region US. Formulas can differ between countries; check your container.
  • Safe to touch: Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.
  • Safe to handle: Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.
  • Ready for another coat: Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Mohawk Finishing Wiping Stain Black (MA240-2247)
Variant
Wiping stain
Region
US
Listed use
wiping stain, black wood stain, wood stain
Timed stages recorded
touch, handle, recoat min
Source checked
2026-10-25

Documentation: Technical data sheet · No date on the sheet

Condition attached to the stated time: Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.

About this product

A black wiping stain from Mohawk's MA240 line. Its data sheet gives a topcoat time of 60 minutes and marks recoat as not applicable, since the stain is meant to be sealed, not stained again.

Using this specific product

Mohawk Finishing Wiping Stain Black (MA240-2247) is listed here as the Wiping stain version for wiping stain, black wood stain, and wood stain. For finishing wood, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Wiping stain; related versions can use different timing.
  • For wiping stain, black wood stain, and wood stain, pay particular attention to bare-wood preparation, coat thickness and room airflow.
  • Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.

How to check readiness

Check a hidden area for tack, odor and marking before handling or use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Lift or move the item gently and avoid twisting the bond or pressing finished faces together. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required.

Avoid this mistake

Cool, humid rooms and heavy coats can extend the usable wait substantially.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

Mohawk Finishing states: The data sheet gives 10 minutes to touch. Conditions: Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.. The data sheet gives 20 minutes to handle. Conditions: Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.. The data sheet gives 60 minutes to topcoat. Conditions: Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

How long before I can seal Mohawk Black Wiping Stain?

The data sheet lists 60 minutes to topcoat at 77°F and about 45% humidity, after 10 minutes to touch and 20 minutes to handle. Its 'Recoat Instruction' line reads N/A.

How long until this product is safe to touch?

Mohawk Finishing states: The data sheet gives 10 minutes to touch. Conditions: Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

How long until this product is safe to handle?

Mohawk Finishing states: The data sheet gives 20 minutes to handle. Conditions: Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Drying times change with temperature, humidity, film build and airflow. Follow the current data sheet. Follow the product label for your conditions.

Similar products

All wood finishes