Mohawk Finishing

Enduragreen Waterborne Brushing Urethane Semi-Gloss (M603-21606)

Waterborne brushing varnish · US · manufacturer-sourced

Check your container: This countdown is for the Waterborne brushing varnish variant. Similar-looking versions may have different times.

How long before you can recoat Mohawk Finishing Enduragreen Waterborne Brushing Urethane Semi-Gloss (M603-21606)?

Short answer

Ready for another coat: 1 hour after application.
Curing period complete: 7 days after application.
Wood finish

Finish build-up

Dry to the touch is not ready for furniture

  1. Wipe or brush the Waterborne brushing varnish thin with the grain
  2. Scuff lightly only after the recoat time
  3. Wait out full cure before heavy use

This product’s stated stages Quoted at 77°F

  • Ready for another coat1 hour
  • Normal use3 days
  • Curing period7 days

Worth noticing: Ready for another coat at 1 hour; curing period at 7 days.

Common mistake: Setting a drink or a lamp on a finish that is dry but not cured; rings and prints stay.

Wood finish

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Waterborne brushing varnish directions and prepare for waterborne varnish, brush-on urethane, and table top finish.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Plan the next finish coat

When did you wipe on this coat?
Conditions that affect drying
Where?
Thickness

Stated times

  • Ready for another coat1 hour
  • Normal use3 days
  • Curing period complete7 days

From Mohawk Finishing data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: mohawk-finishing.com

Conditions & fine print
  • Stated conditions: 77°F (25°C)
  • Drying times change with temperature, humidity, film build and airflow. Follow the current data sheet.
  • Region US. Formulas can differ between countries; check your container.
  • Ready for another coat: At 77°F with 50% humidity.
  • Normal use: The source gives no conditions for this time.
  • Curing period complete: The source gives no conditions for this time.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Mohawk Finishing Enduragreen Waterborne Brushing Urethane Semi-Gloss (M603-21606)
Variant
Waterborne brushing varnish
Region
US
Listed use
waterborne varnish, brush-on urethane, table top finish
Timed stages recorded
recoat min, normal use, cure period
Source checked
2026-10-25

Documentation: Technical data sheet · No date on the sheet

Condition attached to the stated time: At 77°F with 50% humidity.

About this product

A brush-on waterborne urethane, also sold as H. Behlen Rockhard Waterborne Brushing Varnish. Recoat is fast at one hour but the finish takes 3 days before normal use and a week before rubbing.

Using this specific product

Mohawk Finishing Enduragreen Waterborne Brushing Urethane Semi-Gloss (M603-21606) is listed here as the Waterborne brushing varnish version for waterborne varnish, brush-on urethane, and table top finish. For finishing wood, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Waterborne brushing varnish; related versions can use different timing.
  • For waterborne varnish, brush-on urethane, and table top finish, pay particular attention to bare-wood preparation, coat thickness and room airflow.
  • At 77°F with 50% humidity. The source gives no conditions for this time.

How to check readiness

Check a hidden area for tack, odor and marking before handling or use. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required. The data sheet says to allow the final coat to dry a minimum of 3 days before normal use. The data sheet says to dry a minimum of one week before rubbing the finish.

Avoid this mistake

Cool, humid rooms and heavy coats can extend the usable wait substantially.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

Mohawk Finishing states: The data sheet says to recoat in one hour under standard conditions. Conditions: At 77°F with 50% humidity.. The data sheet says to allow the final coat to dry a minimum of 3 days before normal use. Conditions: The source gives no conditions for this time.. The data sheet says to dry a minimum of one week before rubbing the finish. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

How long before I can use a table finished with Enduragreen Brushing Urethane?

The data sheet says to allow the final coat to dry a minimum of 3 days before normal use, and a minimum of one week before rubbing the finish. Recoat between coats is one hour at 77°F and 50% humidity.

What affects how long this product takes to dry or cure?

Drying times change with temperature, humidity, film build and airflow. Follow the current data sheet. Follow the product label for your conditions.

Similar products

All wood finishes