BEHR

DECKplus Semi-Transparent Waterproofing Wood Stain (No. 3077)

Semi-transparent · US · not yet reviewed

Check your container: This countdown is for the Semi-transparent variant. Similar-looking versions may have different times.

How long before you can recoat BEHR DECKplus Semi-Transparent Waterproofing Wood Stain (No. 3077)?

Short answer

Ready for another coat: 1–2 hours after application.
Not paintable.
Wood finish

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Semi-transparent directions and prepare for deck stain, fence, and wood stain.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Calculate the next coating step

When did this coat go on?
Conditions that affect drying
Where?
Thickness

Stated times

  • Ready for another coat1–2 hours
  • Full cure3 days
  • Paint-readyNot paintable

From BEHR product page · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: behr.com

Conditions & fine print
  • Stated conditions: Not stated by the manufacturer
  • Do not use if rain is expected within 24 hours; the wood must be completely dry. Apply between 40 and 90°F (4.5 to 32°C). The page gives no dry-to-touch or foot-traffic time.
  • Temperature range: 40°F to 90°F
  • Region US. Formulas can differ between countries; check your container.
  • Ready for another coat: Two thin coats are required.
  • Entered from the manufacturer source; second review pending. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Using this specific product

BEHR DECKplus Semi-Transparent Waterproofing Wood Stain (No. 3077) is listed here as the Semi-transparent version for deck stain, fence, and wood stain. For finishing wood, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Semi-transparent; related versions can use different timing.
  • For deck stain, fence, and wood stain, pay particular attention to bare-wood preparation, coat thickness and room airflow.
  • Two thin coats are required.

How to check readiness

Check a hidden area for tack, odor and marking before handling or use. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required. Reserve full cure for demanding use, chemicals, washing, immersion or load—not merely gentle handling.

Avoid this mistake

Cool, humid rooms and heavy coats can extend the usable wait substantially.

Questions

How long before you can recoat this product?

BEHR states: Allow 1 to 2 hours before recoat. Conditions: Two thin coats are required.. Allow 72 hours for full cure. These are the manufacturer’s stated times, not a guarantee.

How long does this product take to fully cure?

BEHR states: Allow 72 hours for full cure. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Do not use if rain is expected within 24 hours; the wood must be completely dry. Apply between 40 and 90°F (4.5 to 32°C). The page gives no dry-to-touch or foot-traffic time. Follow the product label for your conditions.

Similar products

All wood finishes