Mohawk Finishing

Wiping Wood Stain Light Walnut (M545-2066)

Wiping wood stain · US · manufacturer-sourced

Check your container: This countdown is for the Wiping wood stain variant. Similar-looking versions may have different times.

How long before you can recoat Mohawk Finishing Wiping Wood Stain Light Walnut (M545-2066)?

Short answer

Ready for another coat: 30 minutes after application.
Safe to touch: 5 minutes after application.
Wood finish

Finish build-up

Dry to the touch is not ready for furniture

  1. Wipe or brush the Wiping wood stain thin with the grain
  2. Scuff lightly only after the recoat time
  3. Wait out full cure before heavy use

This product’s stated stages Quoted at 77°F and 45% humidity

  • Safe to touch5 minutes
  • Safe to handle10 minutes
  • Ready for another coat30 minutes

Worth noticing: Safe to touch at 5 minutes; ready for another coat at 30 minutes.

Common mistake: Setting a drink or a lamp on a finish that is dry but not cured; rings and prints stay.

Wood finish

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Wiping wood stain directions and prepare for wiping stain, walnut wood stain, and wood stain.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Plan the next finish coat

When did you wipe on this coat?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to touch5 minutes
  • Safe to handle10 minutes
  • Ready for another coat30 minutes

From Mohawk Finishing data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: mohawk-finishing.com

Conditions & fine print
  • Stated conditions: 77°F (25°C) and 45% relative humidity
  • Drying times change with temperature, humidity, film build and airflow. Follow the current data sheet.
  • Region US. Formulas can differ between countries; check your container.
  • Safe to touch: Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.
  • Safe to handle: Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.
  • Ready for another coat: Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Mohawk Finishing Wiping Wood Stain Light Walnut (M545-2066)
Variant
Wiping wood stain
Region
US
Listed use
wiping stain, walnut wood stain, wood stain
Timed stages recorded
touch, handle, recoat min
Source checked
2026-10-25

Documentation: Technical data sheet · No date on the sheet

Condition attached to the stated time: Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.

About this product

The Wiping Wood stain line dries about twice as fast as the MA240 line on Mohawk's sheets: 5 minutes to touch and 10 to handle, with topcoat at 30 minutes or more.

Using this specific product

Mohawk Finishing Wiping Wood Stain Light Walnut (M545-2066) is listed here as the Wiping wood stain version for wiping stain, walnut wood stain, and wood stain. For finishing wood, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Wiping wood stain; related versions can use different timing.
  • For wiping stain, walnut wood stain, and wood stain, pay particular attention to bare-wood preparation, coat thickness and room airflow.
  • Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.

How to check readiness

Check a hidden area for tack, odor and marking before handling or use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Lift or move the item gently and avoid twisting the bond or pressing finished faces together. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required.

Avoid this mistake

Cool, humid rooms and heavy coats can extend the usable wait substantially.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

Mohawk Finishing states: The data sheet gives 5 minutes to touch. Conditions: Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.. The data sheet gives 10 minutes to handle. Conditions: Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.. The data sheet gives 30 minutes or more to topcoat. Conditions: Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

Is Wiping Wood Stain faster than Mohawk's MA240 wiping stains?

On the data sheets, yes. Wiping Wood Stain lists 5 minutes to touch, 10 to handle and 30+ to topcoat, while the MA240 wiping stains list 10, 20 and 60 minutes. All are measured at 77°F and about 45% humidity.

How long until this product is safe to touch?

Mohawk Finishing states: The data sheet gives 5 minutes to touch. Conditions: Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

How long until this product is safe to handle?

Mohawk Finishing states: The data sheet gives 10 minutes to handle. Conditions: Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Drying times change with temperature, humidity, film build and airflow. Follow the current data sheet. Follow the product label for your conditions.

Similar products

All wood finishes