Teknos

Teknoceiling 02

Water-borne matt ceiling paint (Finland) · EU · manufacturer-sourced

Check your container: This countdown is for the Water-borne matt ceiling paint (Finland) variant. Similar-looking versions may have different times.

How long before you can recoat Teknos Teknoceiling 02?

Short answer

Ready for another coat: 1 hour after application.
Safe to touch: 30 minutes after application.
Paint, primer & patch

Coat-by-coat plan

Touch-dry, recoat and washable are three different dates

  1. Cut in and roll the Water-borne matt ceiling paint (Finland) in even coats
  2. Wait for the recoat time, not touch-dry
  3. Hold off scrubbing until the cure time

This product’s stated stages Quoted at 73°F and 50% humidity

  • Safe to touch30 minutes
  • Ready for another coat1 hour
  • Full cure4 weeks

Worth noticing: Touch-dry comes at 30 minutes, but full cure is 4 weeks, about 1344 times longer.

Common mistake: Closing the door or hanging pictures once the wall feels dry, long before the film has hardened.

Plan the next coat

When did this coat go on?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to touch30 minutes
  • Ready for another coat1 hour
  • Full cure28 days

From Teknos data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: teknos.com

Conditions & fine print
  • Stated conditions: 73°F (23°C) and 50% relative humidity
  • Paint times are for the stated temperature and humidity. Cold, damp rooms and thick films lengthen them. Follow the current data sheet and label.
  • Apply at 41°F or above
  • Region EU. Formulas can differ between countries; check your container.
  • Safe to touch: At 23°C and 50% relative humidity.
  • Ready for another coat: At 23°C and 50% relative humidity.
  • Full cure: Under normal circumstances.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Teknos Teknoceiling 02
Variant
Water-borne matt ceiling paint (Finland)
Region
EU
Listed use
ceilings, interior
Timed stages recorded
touch, recoat min, full cure
Source checked
2026-10-25

Documentation: Technical data sheet · Technical data sheet 4023-00

Condition attached to the stated time: At 23°C and 50% relative humidity.

About this product

A ceiling paint that recoats in an hour and takes about 4 weeks for the film to reach full durability. Air, surface and paint must all be above 5°C.

Using this specific product

Teknos Teknoceiling 02 is listed here as the Water-borne matt ceiling paint (Finland) version for ceilings and interior. For painting, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Water-borne matt ceiling paint (Finland); related versions can use different timing.
  • For ceilings and interior, pay particular attention to surface preparation, coat thickness and ventilation.
  • At 23°C and 50% relative humidity. Under normal circumstances.

How to check readiness

Test an inconspicuous area for firmness and blocking before normal use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required. Reserve full cure for demanding use, chemicals, washing, immersion or load—not merely gentle handling.

Avoid this mistake

Recoating too early can trap solvent or water; waiting much longer may require scuffing under the label directions.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

Teknos states: The sheet gives dust-free in half an hour. Conditions: At 23°C and 50% relative humidity.. The sheet gives overcoating after 1 hour. Conditions: At 23°C and 50% relative humidity.. The sheet gives final film forming in about 4 weeks. Conditions: Under normal circumstances.. These are the manufacturer’s stated times, not a guarantee.

How long before I can recoat Teknoceiling 02?

The sheet gives 1 hour at 23°C and 50% humidity.

How long does this product take to fully cure?

Teknos states: The sheet gives final film forming in about 4 weeks. Conditions: Under normal circumstances.. These are the manufacturer’s stated times, not a guarantee.

How long until this product is safe to touch?

Teknos states: The sheet gives dust-free in half an hour. Conditions: At 23°C and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Paint times are for the stated temperature and humidity. Cold, damp rooms and thick films lengthen them. Follow the current data sheet and label. Follow the product label for your conditions.

Similar products

All paints, primers and patching