Teknos

Teknofloor Stripe

Line-marking paint · EU · manufacturer-sourced

Check your container: This countdown is for the Line-marking paint variant. Similar-looking versions may have different times.

How long before you can recoat Teknos Teknofloor Stripe?

Short answer

Ready for another coat: 2 hours after application.
Safe to touch: 1 hour after application.
Paint, primer & patch

Coat-by-coat plan

Touch-dry, recoat and washable are three different dates

  1. Cut in and roll the Line-marking paint in even coats
  2. Wait for the recoat time, not touch-dry
  3. Hold off scrubbing until the cure time

This product’s stated stages Quoted at 73°F

  • Safe to touch1 hour
  • Ready for another coat2 hours

Worth noticing: Safe to touch at 1 hour; ready for another coat at 2 hours.

Common mistake: Closing the door or hanging pictures once the wall feels dry, long before the film has hardened.

Paint, primer & patch

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Line-marking paint directions and prepare for floor markings and sports halls.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Plan the next coat

When did this coat go on?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to touch1 hour
  • Ready for another coat2 hours

From Teknos data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: teknos.com

Conditions & fine print
  • Stated conditions: 73°F (23°C)
  • Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label.
  • Temperature range: 64°F to 77°F
  • Region EU. Formulas can differ between countries; check your container.
  • Safe to touch: At 23°C and 50% humidity.
  • Ready for another coat: At 23°C and 50% humidity.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Teknos Teknofloor Stripe
Variant
Line-marking paint
Region
EU
Listed use
floor markings, sports halls
Timed stages recorded
touch, recoat min
Source checked
2026-10-25

Documentation: Technical data sheet · Data sheet 2426, revision 2, 04.12.2020

Condition attached to the stated time: At 23°C and 50% humidity.

About this product

A floor line paint with a dust-free time of 1 hour and an overcoat at 2. It wants 18 to 25°C and 35 to 65% humidity.

Using this specific product

Teknos Teknofloor Stripe is listed here as the Line-marking paint version for floor markings and sports halls. For painting, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Line-marking paint; related versions can use different timing.
  • For floor markings and sports halls, pay particular attention to surface preparation, coat thickness and ventilation.
  • At 23°C and 50% humidity.

How to check readiness

Test an inconspicuous area for firmness and blocking before normal use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required.

Avoid this mistake

Recoating too early can trap solvent or water; waiting much longer may require scuffing under the label directions.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

Teknos states: The sheet gives dust-free in 1 hour. Conditions: At 23°C and 50% humidity.. The sheet gives overcoating in 2 hours. Conditions: At 23°C and 50% humidity.. These are the manufacturer’s stated times, not a guarantee.

What conditions does Teknofloor Stripe want?

The sheet gives 18 to 25°C and 35 to 65% relative humidity.

How long until this product is safe to touch?

Teknos states: The sheet gives dust-free in 1 hour. Conditions: At 23°C and 50% humidity.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label. Follow the product label for your conditions.

Similar products

All paints, primers and patching