Select DSIE05
Interior flat · US · manufacturer-sourced
How long before you can recoat Dunn-Edwards Select DSIE05?
Short answer
Coat-by-coat plan
Touch-dry, recoat and washable are three different dates
- Cut in and roll the Interior flat in even coats
- Wait for the recoat time, not touch-dry
- Hold off scrubbing until the cure time
This product’s stated stages Quoted at 73°F
- Safe to touch1–2 hours
- Ready for another coat4–6 hours
Worth noticing: Safe to touch at 1–2 hours; ready for another coat at 4–6 hours.
Common mistake: Closing the door or hanging pictures once the wall feels dry, long before the film has hardened.
Coat timeline
Plan the next coat and final use separately
- 1ApplyUse the Interior flat directions and prepare for ceilings and walls.
- 2Next coatUse the listed recoat milestone; do not substitute touch-dry time.
- 3Normal useWait for the applicable handling, water or cure milestone.
Plan the next coat
Your countdown
Stated times
- Safe to touch1–2 hours
- Ready for another coat4–6 hours
From Dunn-Edwards data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: dunnedwards.com
Conditions & fine print
- Stated conditions: 73°F (23°C)
- Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label.
- Region US. Formulas can differ between countries; check your container.
- Safe to touch: The source gives no conditions for this time.
- Ready for another coat: The source gives no conditions for this time.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Dunn-Edwards Select DSIE05
- Variant
- Interior flat
- Region
- US
- Listed use
- ceilings, walls
- Timed stages recorded
- touch, recoat min
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Product data sheet, 03/24
Condition attached to the stated time: The source gives no conditions for this time.
About this product
A flat interior paint for ceilings and walls with a 4 to 6 hour recoat.
Using this specific product
Dunn-Edwards Select DSIE05 is listed here as the Interior flat version for ceilings and walls. For painting, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Interior flat; related versions can use different timing.
- For ceilings and walls, pay particular attention to surface preparation, coat thickness and ventilation.
- The source gives no conditions for this time.
How to check readiness
Test an inconspicuous area for firmness and blocking before normal use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required.
Avoid this mistake
Recoating too early can trap solvent or water; waiting much longer may require scuffing under the label directions.
Compare with similar products
- Compare with Benjamin Moore Regal Select Interior PaintRecoat: 3 h there, 4–6 h here.
- Compare with Benjamin Moore Regal Select Interior PaintRecoat: 3 h there, 4–6 h here.
Questions
How long before you can recoat this product?
Dunn-Edwards states: The sheet gives touch dry in 1 to 2 hours. Conditions: The source gives no conditions for this time.. The sheet gives a recoat in 4 to 6 hours. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
How long until DSIE05 can be recoated?
The sheet gives 4 to 6 hours, with no conditions stated.
How long until this product is safe to touch?
Dunn-Edwards states: The sheet gives touch dry in 1 to 2 hours. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label. Follow the product label for your conditions.