Evershield EVSH50
Exterior semi-gloss · US · manufacturer-sourced
How long before you can recoat Dunn-Edwards Evershield EVSH50?
Short answer
Coat-by-coat plan
Touch-dry, recoat and washable are three different dates
- Cut in and roll the Exterior semi-gloss in even coats
- Wait for the recoat time, not touch-dry
- Hold off scrubbing until the cure time
This product’s stated stages Quoted at 77°F
- Safe to touch1–2 hours
- Ready for another coat6–8 hours
Worth noticing: Safe to touch at 1–2 hours; ready for another coat at 6–8 hours.
Common mistake: Closing the door or hanging pictures once the wall feels dry, long before the film has hardened.
Coat timeline
Plan the next coat and final use separately
- 1ApplyUse the Exterior semi-gloss directions and prepare for exterior trim, siding, and doors.
- 2Next coatUse the listed recoat milestone; do not substitute touch-dry time.
- 3Normal useWait for the applicable handling, water or cure milestone.
Plan the next coat
Your countdown
Stated times
- Safe to touch1–2 hours
- Ready for another coat6–8 hours
From Dunn-Edwards data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: dunnedwards.com
Conditions & fine print
- Stated conditions: 77°F (25°C)
- Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label.
- Region US. Formulas can differ between countries; check your container.
- Safe to touch: At 77°F.
- Ready for another coat: At 77°F.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Dunn-Edwards Evershield EVSH50
- Variant
- Exterior semi-gloss
- Region
- US
- Listed use
- exterior trim, siding, doors
- Timed stages recorded
- touch, recoat min
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Product data sheet, 07/21
Condition attached to the stated time: At 77°F.
About this product
An exterior semi-gloss with the longest recoat window of the Dunn-Edwards group, 6 to 8 hours. Plan one coat in the morning and one in the afternoon only on a warm day.
Using this specific product
Dunn-Edwards Evershield EVSH50 is listed here as the Exterior semi-gloss version for exterior trim, siding, and doors. For painting, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Exterior semi-gloss; related versions can use different timing.
- For exterior trim, siding, and doors, pay particular attention to surface preparation, coat thickness and ventilation.
- At 77°F.
How to check readiness
Test an inconspicuous area for firmness and blocking before normal use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required.
Avoid this mistake
Recoating too early can trap solvent or water; waiting much longer may require scuffing under the label directions.
Compare with similar products
- Compare with Ronseal Stay White Radiator PaintRecoat: 6 h there, 6–8 h here.
- Compare with Rust-Oleum 8300 Hygienic Wall CoatingRecoat: 6 h there, 6–8 h here.
Questions
How long before you can recoat this product?
Dunn-Edwards states: The sheet gives touch dry in 1 to 2 hours. Conditions: At 77°F.. The sheet gives a recoat in 6 to 8 hours. Conditions: At 77°F.. These are the manufacturer’s stated times, not a guarantee.
How long between coats of Evershield EVSH50?
The sheet gives 6 to 8 hours.
How long until this product is safe to touch?
Dunn-Edwards states: The sheet gives touch dry in 1 to 2 hours. Conditions: At 77°F.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label. Follow the product label for your conditions.