Power Grab Ultimate Construction Adhesive
White · US · not yet reviewed
Short answer
Temporary support can come off: 1–2 days after application.
Full cure: 1–2 days after application.
Used for load-bearing bonds: elapsed time alone can’t confirm it’s ready. Inspect or test before loading.
Start the clock
Your countdown
Stated times
- Working time ends10–15 minutes
- Temporary support can come off1–2 days
- Full cure1–2 days
From Loctite (Henkel) data sheet · checked 2026-10-24. Anything not listed isn’t stated by the manufacturer.
Conditions & fine print
- Stated conditions: 73°F (23°C) and 50% relative humidity
- Low temperature and humidity slow the cure. Use mechanical support or bracing for 24–48 hours. Paintable with water-based acrylic paint.
- Temperature range: 40°F to 105°F
- Region US. Formulas can differ between countries; check your container.
- Working time ends: 73°F and 50% RH
- Temporary support can come off: 73°F and 50% RH
- Full cure: 73°F and 50% RH
- Entered from the manufacturer source; second review pending. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Questions
How long before Power Grab Ultimate Construction Adhesive is temporary support can come off?
Loctite (Henkel) states: Clamping time: 24 hours; use mechanical support or temporary bracing for 24–48 hours. Conditions: 73°F and 50% RH. This is the manufacturer’s stated time, not a guarantee.
How long before Power Grab Ultimate Construction Adhesive is full cure?
Loctite (Henkel) states: Cure time: 24–48 hours. Conditions: 73°F and 50% RH. This is the manufacturer’s stated time, not a guarantee.