Evo-Stik

Sticks Like Turbo Clear

Clear fast-grab adhesive · GB · manufacturer-sourced

Check your container: This countdown is for the Clear fast-grab adhesive variant. Similar-looking versions may have different times.

How long does Evo-Stik Sticks Like Turbo Clear take to dry?

Short answer

Set / hardened: 10 minutes after application.
Full cure: 1 day after application.
Adhesive & glue

Bond-strength path

Hold, handle and full load come at different times

  1. Join the parts with the Clear fast-grab adhesive
  2. Hold or clamp for the set time
  3. Put load on the bond only at full strength

This product’s stated stages Quoted at 73°F

  • Working time ends10 minutes
  • Set10 minutes
  • Full cure1 day

Worth noticing: Working time is only 10 minutes; the next stated stage, set, is 10 minutes.

Common mistake: Releasing the clamps because the glue line feels firm, long before it can carry a load.

Adhesive & glue

Bond-strength path

Assembly, handling and full load are different stages

1 · AssembleClean, fit and apply the Clear fast-grab adhesive version correctly.
2 · HoldKeep the joint undisturbed through its set or clamp stage.
3 · LoadUse full cure—not surface firmness—before demanding use.

Time bond readiness

When was the bond assembled?
Conditions that affect drying
Where?
Thickness

Stated times

  • Working time ends10 minutes
  • Set / hardened10 minutes
  • Full cure1 day

From Evo-Stik data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: farnell.com

Conditions & fine print
  • Stated conditions: 73°F (23°C)
  • Times depend on temperature, humidity, film or bead thickness and airflow. Follow the current data sheet and label.
  • Region GB. Formulas can differ between countries; check your container.
  • Working time ends: The source gives no conditions for this time.
  • Set / hardened: The source gives no conditions for this time.
  • Full cure: It cures about 2 mm in 24 hours.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Evo-Stik Sticks Like Turbo Clear
Variant
Clear fast-grab adhesive
Region
GB
Listed use
clear bonding
Timed stages recorded
tooling, set, full cure
Source checked
2026-10-25

Documentation: Technical data sheet copy · Technical data sheet TDS02256, 25 April 2024

Condition attached to the stated time: The source gives no conditions for this time.

About this product

A clear grab adhesive with a 10 minute window to join surfaces, a cure rate of about 2 mm in 24 hours and full cure at 24 hours.

Using this specific product

Evo-Stik Sticks Like Turbo Clear is listed here as the Clear fast-grab adhesive version for clear bonding. For bonding parts, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Clear fast-grab adhesive; related versions can use different timing.
  • For clear bonding, pay particular attention to surface fit, cleanliness, clamping pressure and bond-line thickness.
  • The source gives no conditions for this time. It cures about 2 mm in 24 hours.

How to check readiness

Test a noncritical offcut or wait for the stated load milestone before stressing the joint. The sheet says to bring surfaces together within 10 minutes. The sheet gives a cure time of 10 minutes. Reserve full cure for demanding use, chemicals, washing, immersion or load—not merely gentle handling.

Avoid this mistake

Handling strength and full load strength are different milestones.

Compare with similar products

Keep going

Questions

How long does this product take to dry?

Evo-Stik states: The sheet says to bring surfaces together within 10 minutes. Conditions: The source gives no conditions for this time.. The sheet gives a cure time of 10 minutes. Conditions: The source gives no conditions for this time.. The sheet gives full cure in 24 hours. Conditions: It cures about 2 mm in 24 hours.. These are the manufacturer’s stated times, not a guarantee.

How long to join parts with Sticks Like Turbo Clear?

The sheet says to bring the surfaces together within 10 minutes.

How long does this product take to fully cure?

Evo-Stik states: The sheet gives full cure in 24 hours. Conditions: It cures about 2 mm in 24 hours.. These are the manufacturer’s stated times, not a guarantee.

How long do I have to work with this product?

Evo-Stik states: The sheet says to bring surfaces together within 10 minutes. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Times depend on temperature, humidity, film or bead thickness and airflow. Follow the current data sheet and label. Follow the product label for your conditions.

Similar products

All adhesives and glues