MAPEI

Ultrabond Super Grip

Pressure-sensitive adhesive · INTL · manufacturer-sourced

Check your container: This countdown is for the Pressure-sensitive adhesive variant. Similar-looking versions may have different times.

How long does MAPEI Ultrabond Super Grip take to dry?

Short answer

Set / hardened: 1–2 days after application.
Adhesive & glue

Bond-strength path

Hold, handle and full load come at different times

  1. Join the parts with the Pressure-sensitive adhesive
  2. Hold or clamp for the set time
  3. Put load on the bond only at full strength

This product’s stated stages Quoted at 70°F

  • Working time ends10–15 minutes
  • Set1–2 days

Worth noticing: Working time is only 10–15 minutes; the next stated stage, set, is 1–2 days.

Common mistake: Releasing the clamps because the glue line feels firm, long before it can carry a load.

Adhesive & glue

Bond-strength path

Assembly, handling and full load are different stages

1 · AssembleClean, fit and apply the Pressure-sensitive adhesive version correctly.
2 · HoldKeep the joint undisturbed through its set or clamp stage.
3 · LoadUse full cure—not surface firmness—before demanding use.

Time bond readiness

When was the bond assembled?
Conditions that affect drying
Where?
Thickness

Stated times

  • Working time ends10–15 minutes
  • Set / hardened1–2 days

From MAPEI product page · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: mapei.com

Conditions & fine print
  • Stated conditions: 70°F (21°C)
  • This is the Indonesian product page, which gives only open time and hardening time. Follow the current technical data sheet for your market.
  • Region INTL. Formulas can differ between countries; check your container.
  • Working time ends: The source gives no conditions for this time.
  • Set / hardened: The source gives no conditions for this time.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
MAPEI Ultrabond Super Grip
Variant
Pressure-sensitive adhesive
Region
INTL
Listed use
flooring adhesive, pressure-sensitive adhesive
Timed stages recorded
tooling, set
Source checked
2026-10-25

Documentation: Official product page · No data revision shown on the page

Condition attached to the stated time: The source gives no conditions for this time.

About this product

A MAPEI flooring adhesive documented from an Indonesian product page that lists just two figures: a 10 to 15 minute open time and a 24 to 48 hour hardening time.

Using this specific product

MAPEI Ultrabond Super Grip is listed here as the Pressure-sensitive adhesive version for flooring adhesive and pressure-sensitive adhesive. For bonding parts, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Pressure-sensitive adhesive; related versions can use different timing.
  • For flooring adhesive and pressure-sensitive adhesive, pay particular attention to surface fit, cleanliness, clamping pressure and bond-line thickness.
  • The source gives no conditions for this time.

How to check readiness

Test a noncritical offcut or wait for the stated load milestone before stressing the joint. The product page gives an open time of 10 to 15 minutes. The product page gives a hardening time of 24 to 48 hours.

Avoid this mistake

Handling strength and full load strength are different milestones.

Compare with similar products

Keep going

Questions

How long does this product take to dry?

MAPEI states: The product page gives an open time of 10 to 15 minutes. Conditions: The source gives no conditions for this time.. The product page gives a hardening time of 24 to 48 hours. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

What does the Ultrabond Super Grip page say about foot traffic or grouting?

Nothing. The page lists a 10 to 15 minute open time and a 24 to 48 hour hardening time, and links a technical data sheet for the rest.

How long do I have to work with this product?

MAPEI states: The product page gives an open time of 10 to 15 minutes. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

This is the Indonesian product page, which gives only open time and hardening time. Follow the current technical data sheet for your market. Follow the product label for your conditions.

Similar products

All adhesives and glues