Power Syringe
Fast-set two-part epoxy syringe · GB · manufacturer-sourced
How long does Evo-Stik Power Syringe take to dry?
Short answer
Two-part cure ladder
Pot life, set and full cure all run off the mix time
- Mix the Fast-set two-part epoxy syringe in the exact ratio
- Work inside the pot life
- Do not load until the stated cure
This product’s stated stages Quoted at 73°F
- Set3–4 minutes
- Safe to handle30 minutes
- Full cure1 day
Worth noticing: Set at 3–4 minutes; full cure at 1 day.
Common mistake: Mixing a large batch in a warm room; the pot life is shorter than the sheet suggests.
Bond-strength path
Assembly, handling and full load are different stages
Time the epoxy cure
Your countdown
Stated times
- Set / hardened3–4 minutes
- Safe to handle30 minutes
- Full cure1 day
From Evo-Stik data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: docs.rs-online.com
Conditions & fine print
- Stated conditions: 73°F (23°C)
- Pot life and cure times shorten in warm rooms and with larger batches. Follow the current data sheet and mixing instructions.
- Region GB. Formulas can differ between countries; check your container.
- Set / hardened: The source gives no conditions for this time.
- Safe to handle: The source gives no conditions for this time.
- Full cure: Hold the parts together for about 80 seconds.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Evo-Stik Power Syringe
- Variant
- Fast-set two-part epoxy syringe
- Region
- GB
- Listed use
- fast repairs
- Timed stages recorded
- set, handle, full cure
- Source checked
- 2026-10-25
Documentation: Technical data sheet copy · Technical data sheet TDS01667, 21 December 2011
Condition attached to the stated time: The source gives no conditions for this time.
About this product
A fast epoxy that sets in 3 to 4 minutes after an 80 second hold, handles after 30 minutes and reaches full cure at 24 hours.
Using this specific product
Evo-Stik Power Syringe is listed here as the Fast-set two-part epoxy syringe version for fast repairs. For mixing and curing epoxy, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Fast-set two-part epoxy syringe; related versions can use different timing.
- For fast repairs, pay particular attention to mix ratio, batch size, temperature and pour thickness.
- The source gives no conditions for this time. Hold the parts together for about 80 seconds.
How to check readiness
Check the coolest or thickest part for firmness before sanding, demolding or loading. The sheet gives set in 3 to 4 minutes. Lift or move the item gently and avoid twisting the bond or pressing finished faces together. Reserve full cure for demanding use, chemicals, washing, immersion or load—not merely gentle handling.
Avoid this mistake
A larger batch can heat faster while a thin film may cure more slowly.
Compare with similar products
- Compare with J-B Weld ClearWeld Quick-Setting Clear EpoxySet: 5 min there, 3–4 min here.
- Compare with J-B Weld PlasticWeld SyringeSet: 5 min there, 3–4 min here.
Questions
How long does this product take to dry?
Evo-Stik states: The sheet gives set in 3 to 4 minutes. Conditions: The source gives no conditions for this time.. The sheet says to leave it at least 30 minutes before handling. Conditions: The source gives no conditions for this time.. The sheet gives full cure in 24 hours. Conditions: Hold the parts together for about 80 seconds.. These are the manufacturer’s stated times, not a guarantee.
How long do I hold parts with Power Syringe?
The sheet gives about 80 seconds.
How long does this product take to fully cure?
Evo-Stik states: The sheet gives full cure in 24 hours. Conditions: Hold the parts together for about 80 seconds.. These are the manufacturer’s stated times, not a guarantee.
How long until this product is safe to handle?
Evo-Stik states: The sheet says to leave it at least 30 minutes before handling. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Pot life and cure times shorten in warm rooms and with larger batches. Follow the current data sheet and mixing instructions. Follow the product label for your conditions.