Devcon

5 Minute Epoxy

Clear (all sizes) · US · not yet reviewed

Check your container: This countdown is for the Clear (all sizes) variant. Similar-looking versions may have different times.

How long does Devcon 5 Minute Epoxy take to dry?

Short answer

Set / hardened: 10–15 minutes after application.
Safe to handle: 45 minutes to 1 hour after application.
Used for structural applications: elapsed time alone can’t confirm it’s ready. Inspect or test before loading.
Epoxy

Bond-strength path

Assembly, handling and full load are different stages

1 · AssembleClean, fit and apply the Clear (all sizes) version correctly.
2 · HoldKeep the joint undisturbed through its set or clamp stage.
3 · LoadUse full cure—not surface firmness—before demanding use.

Calculate bond readiness

When was the bond assembled?
Conditions that affect drying
Where?
Thickness

Stated times

  • Working time ends3–6 minutes
  • Set / hardened10–15 minutes
  • Safe to handle45 minutes to 1 hour
  • Full cure12 hours

From Devcon data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: itwperformancepolymers.com

Conditions & fine print
  • Stated conditions: 72°F (22°C)
  • Devcon lists these times at 72°F (23°C). Colder temperatures lengthen them.
  • Region US. Formulas can differ between countries; check your container.
  • Working time ends: 72°F (23°C)
  • Set / hardened: 72°F (23°C)
  • Safe to handle: 72°F (23°C)
  • Full cure: 72°F (23°C)
  • Entered from the manufacturer source; second review pending. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Using this specific product

Devcon 5 Minute Epoxy is listed here as the Clear (all sizes) version for repair and bonding. For mixing and curing epoxy, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Clear (all sizes); related versions can use different timing.
  • For repair and bonding, pay particular attention to mix ratio, batch size, temperature and pour thickness.
  • 72°F (23°C).

How to check readiness

Check the coolest or thickest part for firmness before sanding, demolding or loading. Working time: 3-6 minutes. Fixture time: 10-15 minutes. Lift or move the item gently and avoid twisting the bond or pressing finished faces together.

Avoid this mistake

A larger batch can heat faster while a thin film may cure more slowly.

Questions

How long does this product take to dry?

Devcon states: Working time: 3-6 minutes. Conditions: 72°F (23°C). Fixture time: 10-15 minutes. Conditions: 72°F (23°C). Functional cure: 0.75-1 hour. Let bonded assemblies stand for the functional cure time before handling. Conditions: 72°F (23°C). Full cure: 12 hours. Conditions: 72°F (23°C). These are the manufacturer’s stated times, not a guarantee.

How long does this product take to fully cure?

Devcon states: Full cure: 12 hours. Conditions: 72°F (23°C). These are the manufacturer’s stated times, not a guarantee.

How long do I have to work with this product?

Devcon states: Working time: 3-6 minutes. Conditions: 72°F (23°C). These are the manufacturer’s stated times, not a guarantee.

How long until this product is safe to handle?

Devcon states: Functional cure: 0.75-1 hour. Let bonded assemblies stand for the functional cure time before handling. Conditions: 72°F (23°C). These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Devcon lists these times at 72°F (23°C). Colder temperatures lengthen them. Follow the product label for your conditions.

Similar products

All epoxies