Loctite (Henkel)

495 Instant Adhesive

Instant adhesive · US · manufacturer-sourced

Check your container: This countdown is for the Instant adhesive variant. Similar-looking versions may have different times.

How long does Loctite (Henkel) 495 Instant Adhesive take to dry?

Short answer

Set / hardened: 1 minute after application.
Adhesive & glue

Bond-strength path

Hold, handle and full load come at different times

  1. Join the parts with the Instant adhesive
  2. Hold or clamp for the set time
  3. Put load on the bond only at full strength

This product’s stated stages Quoted at 73°F

  • Set1 minute

Worth noticing: The manufacturer states only one timing here (set, 1 minute); nothing else is inferred.

Common mistake: Releasing the clamps because the glue line feels firm, long before it can carry a load.

Adhesive & glue

Bond-strength path

Assembly, handling and full load are different stages

1 · AssembleClean, fit and apply the Instant adhesive version correctly.
2 · HoldKeep the joint undisturbed through its set or clamp stage.
3 · LoadUse full cure—not surface firmness—before demanding use.

Time bond readiness

When was the bond assembled?
Conditions that affect drying
Where?
Thickness

Stated times

  • Set / hardened1 minute

From Loctite (Henkel) product page · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: loctiteproducts.com

Conditions & fine print
  • Stated conditions: 73°F (23°C)
  • Instant adhesive fixture times depend on the surfaces, humidity and bond gap. Follow the current data sheet and keep it off skin.
  • Region US. Formulas can differ between countries; check your container.
  • Set / hardened: Moisture-cure adhesive; the page notes an activator can speed the cure.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Loctite (Henkel) 495 Instant Adhesive
Variant
Instant adhesive
Region
US
Listed use
instant bonding
Timed stages recorded
set
Source checked
2026-10-25

Documentation: Official product page · Product page, retrieved 2026-10-26

Condition attached to the stated time: Moisture-cure adhesive; the page notes an activator can speed the cure.

About this product

The page-sourced Loctite in this batch: 5 seconds to fixture on steel, with the cure type listed as moisture cure and an activator, LOCTITE SF 7452, to speed it. The full data sheet was not readable, so there is no full-cure figure.

Using this specific product

Loctite (Henkel) 495 Instant Adhesive is listed here as the Instant adhesive version for instant bonding. For bonding parts, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Instant adhesive; related versions can use different timing.
  • For instant bonding, pay particular attention to surface fit, cleanliness, clamping pressure and bond-line thickness.
  • Moisture-cure adhesive; the page notes an activator can speed the cure.

How to check readiness

Test a noncritical offcut or wait for the stated load milestone before stressing the joint. The data sheet gives the fixture time in seconds, so the page uses the one-minute minimum the calculator can show. The product page gives a fixture time of 5.0 seconds on steel.

Avoid this mistake

Handling strength and full load strength are different milestones.

Compare with similar products

Keep going

Questions

How long does this product take to dry?

Loctite (Henkel) states: The data sheet gives the fixture time in seconds, so the page uses the one-minute minimum the calculator can show. The product page gives a fixture time of 5.0 seconds on steel. Conditions: Moisture-cure adhesive; the page notes an activator can speed the cure.. These are the manufacturer’s stated times, not a guarantee.

Is there a faster option for LOCTITE 495?

The product page names LOCTITE SF 7452 activator to speed the cure. It gives a fixture time of 5 seconds on steel without it.

What affects how long this product takes to dry or cure?

Instant adhesive fixture times depend on the surfaces, humidity and bond gap. Follow the current data sheet and keep it off skin. Follow the product label for your conditions.

Similar products

All adhesives and glues