Norland Products

Norland Optical Adhesive 61

UV-curing optical adhesive · US · manufacturer-sourced

Check your container: This countdown is for the UV-curing optical adhesive variant. Similar-looking versions may have different times.

How long does Norland Products Norland Optical Adhesive 61 take to dry?

Short answer

Set / hardened: 5–10 minutes after application.
Full cure: 7 days after application.
Adhesive & glue

Bond-strength path

Hold, handle and full load come at different times

  1. Join the parts with the UV-curing optical adhesive
  2. Hold or clamp for the set time
  3. Put load on the bond only at full strength

This product’s stated stages Quoted at 73°F

  • Set5–10 minutes
  • Full cure7 days

Worth noticing: Set at 5–10 minutes; full cure at 7 days.

Common mistake: Releasing the clamps because the glue line feels firm, long before it can carry a load.

Adhesive & glue

Bond-strength path

Assembly, handling and full load are different stages

1 · AssembleClean, fit and apply the UV-curing optical adhesive version correctly.
2 · HoldKeep the joint undisturbed through its set or clamp stage.
3 · LoadUse full cure—not surface firmness—before demanding use.

Time bond readiness

When was the bond assembled?
Conditions that affect drying
Where?
Thickness

Stated times

  • Set / hardened5–10 minutes
  • Full cure7 days

From Norland Products data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: norlandprod.com

Conditions & fine print
  • Stated conditions: 73°F (23°C)
  • UV cure depends on lamp output, distance and bond-line thickness. Follow the current data sheet.
  • Region US. Formulas can differ between countries; check your container.
  • Set / hardened: At 6 inches. Precure is 10 seconds.
  • Full cure: The source gives no conditions for this time.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Norland Products Norland Optical Adhesive 61
Variant
UV-curing optical adhesive
Region
US
Listed use
optics, lens bonding, glass
Timed stages recorded
set, full cure
Source checked
2026-10-25

Documentation: Technical data sheet copy · Undated technical data sheet

Condition attached to the stated time: At 6 inches. Precure is 10 seconds.

About this product

A UV-cure optical adhesive for glass and lenses. The lamp does the quick part, 10 seconds for a precure and 5 to 10 minutes for a final cure under a 100 watt mercury lamp, but full adhesion to glass takes about a week of room-temperature aging.

Using this specific product

Norland Products Norland Optical Adhesive 61 is listed here as the UV-curing optical adhesive version for optics, lens bonding, and glass. For bonding parts, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says UV-curing optical adhesive; related versions can use different timing.
  • For optics, lens bonding, and glass, pay particular attention to surface fit, cleanliness, clamping pressure and bond-line thickness.
  • At 6 inches. Precure is 10 seconds. The source gives no conditions for this time.

How to check readiness

Test a noncritical offcut or wait for the stated load milestone before stressing the joint. The data sheet says the final cure can be accomplished in 5 to 10 minutes with a 100 watt mercury lamp. Reserve full cure for demanding use, chemicals, washing, immersion or load—not merely gentle handling.

Avoid this mistake

Handling strength and full load strength are different milestones.

Compare with similar products

Keep going

Questions

How long does this product take to dry?

Norland Products states: The data sheet says the final cure can be accomplished in 5 to 10 minutes with a 100 watt mercury lamp. Conditions: At 6 inches. Precure is 10 seconds.. The data sheet says full adhesion to glass develops by aging at room temperature for about 1 week. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

Is NOA 61 fully cured after the UV lamp?

Not for adhesion to glass. The sheet says full adhesion develops by aging at room temperature for about 1 week, or by aging at 50°C for 12 hours. The UV step gives the cure.

How long does this product take to fully cure?

Norland Products states: The data sheet says full adhesion to glass develops by aging at room temperature for about 1 week. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

UV cure depends on lamp output, distance and bond-line thickness. Follow the current data sheet. Follow the product label for your conditions.

Similar products

All adhesives and glues