Liquid Nails

FUZE*IT All Surface Construction Adhesive (LN-2000)

Cartridge · US · not yet reviewed

Short answer

Full cure: 1 day after application.
Working time ends: 20 minutes after application.

Start the clock

When did you apply it?
Outdoors, temperature
Where?
Thickness

Stated times

  • Working time ends20 minutes
  • Full cure1 day

From Liquid Nails data sheet · checked 2026-10-24. Anything not listed isn’t stated by the manufacturer.

Conditions & fine print
  • Stated conditions: Room temperature
  • Press surfaces together within 10 minutes. Clamp, tape or brace until set; the data sheet gives no set time. The adhesive itself should be 40–100°F when applied.
  • Temperature range: 0°F to 140°F
  • Region US. Formulas can differ between countries; check your container.
  • Working time ends: Room temperature
  • Full cure: Room temperature
  • Entered from the manufacturer source; second review pending. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Questions

How long before FUZE*IT All Surface Construction Adhesive (LN-2000) is full cure?

Liquid Nails states: Minimum cure time: 24 hours at room temperature. Conditions: Room temperature. This is the manufacturer’s stated time, not a guarantee.

How long is the working time for FUZE*IT All Surface Construction Adhesive (LN-2000)?

Liquid Nails states: Open time: 20 minutes at room temperature (press surfaces together within 10 minutes). Conditions: Room temperature. This is the manufacturer’s stated time, not a guarantee.

Similar products

All adhesives and glues