Dunlop

Flexible Rapidset

Rapid-setting flexible tile adhesive · AU · manufacturer-sourced

Check your container: This countdown is for the Rapid-setting flexible tile adhesive variant. Similar-looking versions may have different times.

How long before you can grout over Dunlop Flexible Rapidset?

Short answer

Ready for grout: 3 hours after application.
Adhesive & glue

Bond-strength path

Hold, handle and full load come at different times

  1. Join the parts with the Rapid-setting flexible tile adhesive
  2. Hold or clamp for the set time
  3. Put load on the bond only at full strength

This product’s stated stages Quoted at 73°F

  • Working time ends20–30 minutes
  • Ready for grout3 hours

Worth noticing: Working time is only 20–30 minutes; the next stated stage, ready for grout, is 3 hours.

Common mistake: Releasing the clamps because the glue line feels firm, long before it can carry a load.

Adhesive & glue

Bond-strength path

Assembly, handling and full load are different stages

1 · AssembleClean, fit and apply the Rapid-setting flexible tile adhesive version correctly.
2 · HoldKeep the joint undisturbed through its set or clamp stage.
3 · LoadUse full cure—not surface firmness—before demanding use.

Time bond readiness

When was the bond assembled?
Conditions that affect drying
Where?
Thickness

Stated times

  • Working time ends20–30 minutes
  • Ready for grout3 hours

From Dunlop data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: selcobw.com

Conditions & fine print
  • Stated conditions: 73°F (23°C)
  • Tile adhesive times assume the stated temperature on an absorbent substrate. Dense tiles, damp or cold rooms and thick beds lengthen them. Follow the current data sheet.
  • Region AU. Formulas can differ between countries; check your container.
  • Working time ends: Adjustment time is 10 minutes.
  • Ready for grout: Tile adhesive times assume the stated temperature on an absorbent substrate. Dense tiles, damp or cold rooms and thick beds lengthen them. Follow the current data sheet.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Dunlop Flexible Rapidset
Variant
Rapid-setting flexible tile adhesive
Region
AU
Listed use
rapid tiling
Timed stages recorded
tooling, grout ready
Source checked
2026-10-25

Documentation: Technical data sheet copy · Technical data sheet, 2 April 2015

Condition attached to the stated time: Adjustment time is 10 minutes.

About this product

A rapid adhesive with a short adjustment window, 10 minutes, inside a fixing time of 20 to 30 minutes. Grouting waits at least 3 hours.

Using this specific product

Dunlop Flexible Rapidset is listed here as the Rapid-setting flexible tile adhesive version for rapid tiling. For bonding parts, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Rapid-setting flexible tile adhesive; related versions can use different timing.
  • For rapid tiling, pay particular attention to surface fit, cleanliness, clamping pressure and bond-line thickness.
  • Adjustment time is 10 minutes. Tile adhesive times assume the stated temperature on an absorbent substrate. Dense tiles, damp or cold rooms and thick beds lengthen them. Follow the current data sheet.

How to check readiness

Test a noncritical offcut or wait for the stated load milestone before stressing the joint. The sheet gives a fixing time of 20 to 30 minutes. The sheet gives grouting after at least 3 hours.

Avoid this mistake

Handling strength and full load strength are different milestones.

Compare with similar products

Keep going

Questions

How long before you can grout over this product?

Dunlop states: The sheet gives a fixing time of 20 to 30 minutes. Conditions: Adjustment time is 10 minutes.. The sheet gives grouting after at least 3 hours. Conditions: Tile adhesive times assume the stated temperature on an absorbent substrate. Dense tiles, damp or cold rooms and thick beds lengthen them. Follow the current data sheet.. These are the manufacturer’s stated times, not a guarantee.

How long can I reposition a tile on Flexible Rapidset?

The sheet gives an adjustment time of 10 minutes.

How long do I have to work with this product?

Dunlop states: The sheet gives a fixing time of 20 to 30 minutes. Conditions: Adjustment time is 10 minutes.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Tile adhesive times assume the stated temperature on an absorbent substrate. Dense tiles, damp or cold rooms and thick beds lengthen them. Follow the current data sheet. Follow the product label for your conditions.

Similar products

All adhesives and glues