Dunlop

Tile Adhesive for Green Screed

Adhesive for tiling over fresh screed · AU · manufacturer-sourced

Check your container: This countdown is for the Adhesive for tiling over fresh screed variant. Similar-looking versions may have different times.

How long before you can grout over Dunlop Tile Adhesive for Green Screed?

Short answer

Ready for grout: 1 day after application.
Adhesive & glue

Bond-strength path

Hold, handle and full load come at different times

  1. Join the parts with the Adhesive for tiling over fresh screed
  2. Hold or clamp for the set time
  3. Put load on the bond only at full strength

This product’s stated stages Quoted at 73°F

  • Working time ends20 minutes
  • Ready for grout1 day

Worth noticing: Working time is only 20 minutes; the next stated stage, ready for grout, is 1 day.

Common mistake: Releasing the clamps because the glue line feels firm, long before it can carry a load.

Adhesive & glue

Bond-strength path

Assembly, handling and full load are different stages

1 · AssembleClean, fit and apply the Adhesive for tiling over fresh screed version correctly.
2 · HoldKeep the joint undisturbed through its set or clamp stage.
3 · LoadUse full cure—not surface firmness—before demanding use.

Time bond readiness

When was the bond assembled?
Conditions that affect drying
Where?
Thickness

Stated times

  • Working time ends20 minutes
  • Ready for grout1 day

From Dunlop data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: specifiedby.com

Conditions & fine print
  • Stated conditions: 73°F (23°C)
  • Tile adhesive times assume the stated temperature on an absorbent substrate. Dense tiles, damp or cold rooms and thick beds lengthen them. Follow the current data sheet.
  • Region AU. Formulas can differ between countries; check your container.
  • Working time ends: Adjustment time is 20 minutes. Use within 5 hours of mixing.
  • Ready for grout: At 20°C (68°F).
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Dunlop Tile Adhesive for Green Screed
Variant
Adhesive for tiling over fresh screed
Region
AU
Listed use
green screed tiling
Timed stages recorded
tooling, grout ready
Source checked
2026-10-25

Documentation: Technical data sheet copy · Specification listing, undated

Condition attached to the stated time: Adjustment time is 20 minutes. Use within 5 hours of mixing.

About this product

An adhesive for tiling onto screed that is only 24 hours old, against 7 days for concrete. Mixed adhesive stays usable for 5 hours.

Using this specific product

Dunlop Tile Adhesive for Green Screed is listed here as the Adhesive for tiling over fresh screed version for green screed tiling. For bonding parts, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Adhesive for tiling over fresh screed; related versions can use different timing.
  • For green screed tiling, pay particular attention to surface fit, cleanliness, clamping pressure and bond-line thickness.
  • Adjustment time is 20 minutes. Use within 5 hours of mixing. At 20°C (68°F).

How to check readiness

Test a noncritical offcut or wait for the stated load milestone before stressing the joint. The listing gives a fixing time of about 20 minutes. The listing gives grouting after at least 24 hours.

Avoid this mistake

Handling strength and full load strength are different milestones.

Compare with similar products

Keep going

Questions

How long before you can grout over this product?

Dunlop states: The listing gives a fixing time of about 20 minutes. Conditions: Adjustment time is 20 minutes. Use within 5 hours of mixing.. The listing gives grouting after at least 24 hours. Conditions: At 20°C (68°F).. These are the manufacturer’s stated times, not a guarantee.

How young can the screed be under this adhesive?

The listing gives 24 hours for screed and 7 days for concrete.

How long do I have to work with this product?

Dunlop states: The listing gives a fixing time of about 20 minutes. Conditions: Adjustment time is 20 minutes. Use within 5 hours of mixing.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Tile adhesive times assume the stated temperature on an absorbent substrate. Dense tiles, damp or cold rooms and thick beds lengthen them. Follow the current data sheet. Follow the product label for your conditions.

Similar products

All adhesives and glues