ARDEX

X 17 White

Flexible white tile adhesive (Australia) · AU · manufacturer-sourced

Check your container: This countdown is for the Flexible white tile adhesive (Australia) variant. Similar-looking versions may have different times.

How long before you can grout over ARDEX X 17 White?

Short answer

Ready for grout: 1 day after application.
Adhesive & glue

Bond-strength path

Hold, handle and full load come at different times

  1. Join the parts with the Flexible white tile adhesive (Australia)
  2. Hold or clamp for the set time
  3. Put load on the bond only at full strength

This product’s stated stages Quoted at 73°F and 50% humidity

  • Working time ends30 minutes
  • Ready for grout1 day
  • Normal use1 day

Worth noticing: Working time is only 30 minutes; the next stated stage, ready for grout, is 1 day.

Common mistake: Releasing the clamps because the glue line feels firm, long before it can carry a load.

Adhesive & glue

Bond-strength path

Assembly, handling and full load are different stages

1 · AssembleClean, fit and apply the Flexible white tile adhesive (Australia) version correctly.
2 · HoldKeep the joint undisturbed through its set or clamp stage.
3 · LoadUse full cure—not surface firmness—before demanding use.

Time bond readiness

When was the bond assembled?
Conditions that affect drying
Where?
Thickness

Stated times

  • Working time ends30 minutes
  • Ready for grout1 day
  • Normal use1 day

From ARDEX data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: ardex.com

Conditions & fine print
  • Stated conditions: 73°F (23°C) and 50% relative humidity
  • Tile adhesive times assume the stated temperature on an absorbent substrate. Dense tiles, damp or cold rooms and thick beds lengthen them. Follow the current data sheet.
  • Region AU. Formulas can differ between countries; check your container.
  • Working time ends: Pot life is 3 hours.
  • Ready for grout: At 23°C (73°F) and 50% relative humidity.
  • Normal use: At 23°C (73°F) and 50% relative humidity.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
ARDEX X 17 White
Variant
Flexible white tile adhesive (Australia)
Region
AU
Listed use
white tile fixing
Timed stages recorded
tooling, grout ready, normal use
Source checked
2026-10-25

Documentation: Technical data sheet · Technical data sheet, June 2025

Condition attached to the stated time: Pot life is 3 hours.

About this product

A white flexible adhesive with a long pot life, 3 hours, and an open time of 30 minutes. Grouting and traffic both wait 24 hours at 23°C.

Using this specific product

ARDEX X 17 White is listed here as the Flexible white tile adhesive (Australia) version for white tile fixing. For bonding parts, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Flexible white tile adhesive (Australia); related versions can use different timing.
  • For white tile fixing, pay particular attention to surface fit, cleanliness, clamping pressure and bond-line thickness.
  • Pot life is 3 hours. At 23°C (73°F) and 50% relative humidity.

How to check readiness

Test a noncritical offcut or wait for the stated load milestone before stressing the joint. The sheet gives an open time of 30 minutes. The sheet gives grouting after 24 hours. The sheet gives traffic after 24 hours.

Avoid this mistake

Handling strength and full load strength are different milestones.

Compare with similar products

Keep going

Questions

How long before you can grout over this product?

ARDEX states: The sheet gives an open time of 30 minutes. Conditions: Pot life is 3 hours.. The sheet gives grouting after 24 hours. Conditions: At 23°C (73°F) and 50% relative humidity.. The sheet gives traffic after 24 hours. Conditions: At 23°C (73°F) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

How long is the pot life of ARDEX X 17?

The sheet gives 3 hours.

How long do I have to work with this product?

ARDEX states: The sheet gives an open time of 30 minutes. Conditions: Pot life is 3 hours.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Tile adhesive times assume the stated temperature on an absorbent substrate. Dense tiles, damp or cold rooms and thick beds lengthen them. Follow the current data sheet. Follow the product label for your conditions.

Similar products

All adhesives and glues