MPP
Multi-purpose tile adhesive (NZ) · NZ · manufacturer-sourced
How long before you can grout over ARDEX MPP?
Short answer
Bond-strength path
Hold, handle and full load come at different times
- Join the parts with the Multi-purpose tile adhesive (NZ)
- Hold or clamp for the set time
- Put load on the bond only at full strength
This product’s stated stages Quoted at 73°F
- Working time ends45 minutes
- Ready for grout4–6 hours
- Light foot traffic1 day
Worth noticing: Working time is only 45 minutes; the next stated stage, ready for grout, is 4–6 hours.
Common mistake: Releasing the clamps because the glue line feels firm, long before it can carry a load.
Bond-strength path
Assembly, handling and full load are different stages
Time bond readiness
Your countdown
Stated times
- Working time ends45 minutes
- Ready for grout4–6 hours
- Light foot traffic1 day
From ARDEX data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: ardex.com
Conditions & fine print
- Stated conditions: 73°F (23°C)
- Tile adhesive times assume the stated temperature on an absorbent substrate. Dense tiles, damp or cold rooms and thick beds lengthen them. Follow the current data sheet.
- Region NZ. Formulas can differ between countries; check your container.
- Working time ends: Pot life is 2 hours.
- Ready for grout: Tile adhesive times assume the stated temperature on an absorbent substrate. Dense tiles, damp or cold rooms and thick beds lengthen them. Follow the current data sheet.
- Light foot traffic: Tile adhesive times assume the stated temperature on an absorbent substrate. Dense tiles, damp or cold rooms and thick beds lengthen them. Follow the current data sheet.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- ARDEX MPP
- Variant
- Multi-purpose tile adhesive (NZ)
- Region
- NZ
- Listed use
- tile fixing
- Timed stages recorded
- tooling, grout ready, light foot
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Data sheet, November 2011
Condition attached to the stated time: Pot life is 2 hours.
About this product
A 2011 sheet with a pot life of 2 hours, open time of about 45 minutes, grouting at 4 to 6 hours and light traffic at 24.
Using this specific product
ARDEX MPP is listed here as the Multi-purpose tile adhesive (NZ) version for tile fixing. For bonding parts, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Multi-purpose tile adhesive (NZ); related versions can use different timing.
- For tile fixing, pay particular attention to surface fit, cleanliness, clamping pressure and bond-line thickness.
- Pot life is 2 hours. Tile adhesive times assume the stated temperature on an absorbent substrate. Dense tiles, damp or cold rooms and thick beds lengthen them. Follow the current data sheet.
How to check readiness
Test a noncritical offcut or wait for the stated load milestone before stressing the joint. The sheet gives an open time of about 45 minutes. The sheet says to grout once the adhesive is firm, about 4 to 6 hours. Try a protected edge first and avoid turning, dragging or concentrated loads.
Avoid this mistake
Handling strength and full load strength are different milestones.
Compare with similar products
- Compare with Bostik Stix A740 Multi BestLight foot traffic: 1 day there, 1 day here.
- Compare with MAPEI Keraset (Hong Kong page)Light foot traffic: 1 day there, 1 day here.
Questions
How long before you can grout over this product?
ARDEX states: The sheet gives an open time of about 45 minutes. Conditions: Pot life is 2 hours.. The sheet says to grout once the adhesive is firm, about 4 to 6 hours. Conditions: Tile adhesive times assume the stated temperature on an absorbent substrate. Dense tiles, damp or cold rooms and thick beds lengthen them. Follow the current data sheet.. The sheet gives light foot traffic after 24 hours. Conditions: Tile adhesive times assume the stated temperature on an absorbent substrate. Dense tiles, damp or cold rooms and thick beds lengthen them. Follow the current data sheet.. These are the manufacturer’s stated times, not a guarantee.
When can I grout over ARDEX MPP?
The sheet says once the adhesive is firm, about 4 to 6 hours.
How long do I have to work with this product?
ARDEX states: The sheet gives an open time of about 45 minutes. Conditions: Pot life is 2 hours.. These are the manufacturer’s stated times, not a guarantee.
How long before I can walk on tile set with this product?
ARDEX states: The sheet gives light foot traffic after 24 hours. Conditions: Tile adhesive times assume the stated temperature on an absorbent substrate. Dense tiles, damp or cold rooms and thick beds lengthen them. Follow the current data sheet.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Tile adhesive times assume the stated temperature on an absorbent substrate. Dense tiles, damp or cold rooms and thick beds lengthen them. Follow the current data sheet. Follow the product label for your conditions.