ARDEX

X 11 W

White flexible tile adhesive (UK) · GB · manufacturer-sourced

Check your container: This countdown is for the White flexible tile adhesive (UK) variant. Similar-looking versions may have different times.

How long before you can grout over ARDEX X 11 W?

Short answer

Ready for grout: 6–8 hours after application.
Adhesive & glue

Bond-strength path

Hold, handle and full load come at different times

  1. Join the parts with the White flexible tile adhesive (UK)
  2. Hold or clamp for the set time
  3. Put load on the bond only at full strength

This product’s stated stages Quoted at 73°F

  • Working time ends45 minutes
  • Ready for grout6–8 hours
  • Normal use6–8 hours

Worth noticing: Working time is only 45 minutes; the next stated stage, ready for grout, is 6–8 hours.

Common mistake: Releasing the clamps because the glue line feels firm, long before it can carry a load.

Adhesive & glue

Bond-strength path

Assembly, handling and full load are different stages

1 · AssembleClean, fit and apply the White flexible tile adhesive (UK) version correctly.
2 · HoldKeep the joint undisturbed through its set or clamp stage.
3 · LoadUse full cure—not surface firmness—before demanding use.

Time bond readiness

When was the bond assembled?
Conditions that affect drying
Where?
Thickness

Stated times

  • Working time ends45 minutes
  • Ready for grout6–8 hours
  • Normal use6–8 hours

From ARDEX data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: ardex.com

Conditions & fine print
  • Stated conditions: 73°F (23°C)
  • Tile adhesive times assume the stated temperature on an absorbent substrate. Dense tiles, damp or cold rooms and thick beds lengthen them. Follow the current data sheet.
  • Apply at 41°F or above
  • Region GB. Formulas can differ between countries; check your container.
  • Working time ends: Pot life is 2.5 hours at 20°C.
  • Ready for grout: At 20°C (68°F).
  • Normal use: At 20°C (68°F).
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
ARDEX X 11 W
Variant
White flexible tile adhesive (UK)
Region
GB
Listed use
white tile fixing
Timed stages recorded
tooling, grout ready, normal use
Source checked
2026-10-25

Documentation: Technical data sheet · Data sheet, July 2023

Condition attached to the stated time: Pot life is 2.5 hours at 20°C.

About this product

A UK white adhesive with a 2.5 hour pot life at 20°C, an open time of up to 45 minutes, and grouting and traffic after 6 to 8 hours.

Using this specific product

ARDEX X 11 W is listed here as the White flexible tile adhesive (UK) version for white tile fixing. For bonding parts, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says White flexible tile adhesive (UK); related versions can use different timing.
  • For white tile fixing, pay particular attention to surface fit, cleanliness, clamping pressure and bond-line thickness.
  • Pot life is 2.5 hours at 20°C. At 20°C (68°F).

How to check readiness

Test a noncritical offcut or wait for the stated load milestone before stressing the joint. The sheet gives an open time of up to 45 minutes. The sheet gives grouting after 6 to 8 hours. The sheet gives traffic after 6 to 8 hours.

Avoid this mistake

Handling strength and full load strength are different milestones.

Compare with similar products

Keep going

Questions

How long before you can grout over this product?

ARDEX states: The sheet gives an open time of up to 45 minutes. Conditions: Pot life is 2.5 hours at 20°C.. The sheet gives grouting after 6 to 8 hours. Conditions: At 20°C (68°F).. The sheet gives traffic after 6 to 8 hours. Conditions: At 20°C (68°F).. These are the manufacturer’s stated times, not a guarantee.

When can I grout over X 11 W?

The sheet gives 6 to 8 hours at 20°C.

How long do I have to work with this product?

ARDEX states: The sheet gives an open time of up to 45 minutes. Conditions: Pot life is 2.5 hours at 20°C.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Tile adhesive times assume the stated temperature on an absorbent substrate. Dense tiles, damp or cold rooms and thick beds lengthen them. Follow the current data sheet. Follow the product label for your conditions.

Similar products

All adhesives and glues