Dunlop

Flexible Wall Grout

Flexible cementitious wall grout · AU · manufacturer-sourced

Check your container: This countdown is for the Flexible cementitious wall grout variant. Similar-looking versions may have different times.

How long before Dunlop Flexible Wall Grout can get wet?

Short answer

Water-ready: 14 days after application.
Set / hardened: 1 day after application.
Grout & tile mortar

Grout wait-and-wash

Wipe-off, light foot traffic and sealing each have their own wait

  1. Pack the joints with Flexible cementitious wall grout
  2. Wipe off inside the stated window
  3. Seal and use only after the stated cure

This product’s stated stages Quoted at 73°F

  • Working time ends15 minutes
  • Set1 day
  • Normal use1 day
  • Water-ready2 weeks

Worth noticing: Working time is only 15 minutes; the next stated stage, set, is 1 day.

Common mistake: Sealing or soaking a grout joint that has set but not fully dried.

Grout & tile mortar

Return-to-use gates

Open the surface gradually instead of treating cure as one moment

Touch / inspectA surface check only
Foot trafficUse the stated walking time
Heavy useWait for furniture, water or vehicle readiness

Time the grout cure

When was the grout applied?
Conditions that affect drying
Where?
Thickness

Stated times

  • Working time ends15 minutes
  • Set / hardened1 day
  • Normal use1 day
  • Water-ready14 days

From Dunlop data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: selcobw.com

Conditions & fine print
  • Stated conditions: 73°F (23°C)
  • Tile adhesive times assume the stated temperature on an absorbent substrate. Dense tiles, damp or cold rooms and thick beds lengthen them. Follow the current data sheet.
  • Region AU. Formulas can differ between countries; check your container.
  • Working time ends: Pot life is 45 minutes.
  • Set / hardened: The source gives no conditions for this time.
  • Normal use: The source gives no conditions for this time.
  • Water-ready: Swimming pools wait 3 weeks.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Dunlop Flexible Wall Grout
Variant
Flexible cementitious wall grout
Region
AU
Listed use
wall grouting, showers
Timed stages recorded
tooling, set, normal use, water ready
Source checked
2026-10-25

Documentation: Technical data sheet copy · Technical data sheet, undated

Condition attached to the stated time: Pot life is 45 minutes.

About this product

A wall grout whose sheet splits water use: 24 hours for normal use, 2 weeks before showers and 3 weeks before pools.

Using this specific product

Dunlop Flexible Wall Grout is listed here as the Flexible cementitious wall grout version for wall grouting and showers. For grouting tile, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Flexible cementitious wall grout; related versions can use different timing.
  • For wall grouting and showers, pay particular attention to joint depth, water ratio, cleanup and room conditions.
  • Pot life is 45 minutes. The source gives no conditions for this time. Swimming pools wait 3 weeks.

How to check readiness

Inspect shaded joints and verify the stated water or traffic milestone. The sheet gives a clean-down time of 15 minutes. The sheet gives set at 24 hours. The sheet gives normal use after 24 hours.

Avoid this mistake

Color change alone does not prove the joint is ready for immersion.

Compare with similar products

Keep going

Questions

How long before this product can get wet?

Dunlop states: The sheet gives a clean-down time of 15 minutes. Conditions: Pot life is 45 minutes.. The sheet gives set at 24 hours. Conditions: The source gives no conditions for this time.. The sheet gives normal use after 24 hours. Conditions: The source gives no conditions for this time.. The sheet gives showers after 2 weeks. Conditions: Swimming pools wait 3 weeks.. These are the manufacturer’s stated times, not a guarantee.

When can a shower use Dunlop Flexible Wall Grout?

The sheet gives 2 weeks, and 3 weeks for swimming pools.

How long do I have to work with this product?

Dunlop states: The sheet gives a clean-down time of 15 minutes. Conditions: Pot life is 45 minutes.. These are the manufacturer’s stated times, not a guarantee.

How long until this product is set or hard?

Dunlop states: The sheet gives set at 24 hours. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Tile adhesive times assume the stated temperature on an absorbent substrate. Dense tiles, damp or cold rooms and thick beds lengthen them. Follow the current data sheet. Follow the product label for your conditions.

Similar products

All grout and tile mortar