LATICRETE

PERMACOLOR Grout

All colors · US · not yet reviewed

Check your container: This countdown is for the All colors variant. Similar-looking versions may have different times.

How long before you can shower after using LATICRETE PERMACOLOR Grout?

Short answer

Water-ready: 2 days after application.
Heavy traffic: 6 hours after application.
Grout & tile mortar

Return-to-use gates

Open the surface gradually instead of treating cure as one moment

Touch / inspectA surface check only
Foot trafficUse the stated walking time
Heavy useWait for furniture, water or vehicle readiness

Calculate return-to-use time

When was the material placed?
Conditions that affect drying
Where?
Thickness

Stated times

  • Set / hardened2–3 hours
  • Heavy traffic6 hours
  • Water-ready2 days
  • Immersion-ready14 days

From LATICRETE data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: laticrete.com

Conditions & fine print
  • Stated conditions: 70°F (21°C) and 50% relative humidity
  • Wait a minimum of 48 hours at 70°F before sealing (follow the sealer maker’s instructions if different). Pot life is 45 to 60 minutes at 70°F. The sheet gives no light-traffic time.
  • Region US. Formulas can differ between countries; check your container.
  • Water-ready: 70°F and 50% RH
  • Immersion-ready: 70°F and 50% RH
  • Entered from the manufacturer source; second review pending. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Using this specific product

LATICRETE PERMACOLOR Grout is listed here as the All colors version for tile, floor, and shower. For grouting tile, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says All colors; related versions can use different timing.
  • For tile, floor, and shower, pay particular attention to joint depth, water ratio, cleanup and room conditions.
  • 70°F and 50% RH.

How to check readiness

Inspect shaded joints and verify the stated water or traffic milestone. Final set: 2 to 3 hours. Open the area gradually and keep heavy or hot tires off until the full stated milestone. Test the seam or finish at the least-ventilated spot before normal water exposure.

Avoid this mistake

Color change alone does not prove the joint is ready for immersion.

Questions

How long until I can shower after using this product?

LATICRETE states: For intermittent water exposure such as showers, allow the area to cure a minimum of 48 hours. Conditions: 70°F and 50% RH. For submerged applications or steam rooms, allow PERMACOLOR to cure for 14 days before filling with water or exposing to steam. Conditions: 70°F and 50% RH. These are the manufacturer’s stated times, not a guarantee.

How long does this product take to dry?

LATICRETE states: For intermittent water exposure such as showers, allow the area to cure a minimum of 48 hours. Conditions: 70°F and 50% RH. Heavy foot traffic: 6 hours. For submerged applications or steam rooms, allow PERMACOLOR to cure for 14 days before filling with water or exposing to steam. Conditions: 70°F and 50% RH. These are the manufacturer’s stated times, not a guarantee.

How long until I can walk or drive on this product?

LATICRETE states: Heavy foot traffic: 6 hours. These are the manufacturer’s stated times, not a guarantee.

How long until this product is safe to touch or handle?

LATICRETE states: Final set: 2 to 3 hours. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Wait a minimum of 48 hours at 70°F before sealing (follow the sealer maker’s instructions if different). Pot life is 45 to 60 minutes at 70°F. The sheet gives no light-traffic time. Follow the product label for your conditions.

Similar products

All grout and tile mortar