LOBA

2K Supra A.T. Satin

Two-component water-based polyurethane floor finish, 11465 · US · manufacturer-sourced

Check your container: This countdown is for the Two-component water-based polyurethane floor finish, 11465 variant. Similar-looking versions may have different times.

How long before you can recoat LOBA 2K Supra A.T. Satin?

Short answer

Ready for another coat: 2–3 hours after application.
Full cure: 3 days after application.
Wood finish

Finish build-up

Dry to the touch is not ready for furniture

  1. Wipe or brush the Two-component water-based polyurethane floor finish, 11465 thin with the grain
  2. Scuff lightly only after the recoat time
  3. Wait out full cure before heavy use

This product’s stated stages Quoted at 68°F and 50% humidity

  • Working time ends2 hours
  • Ready for another coat2–3 hours
  • Normal use12 hours
  • Full cure3 days

Worth noticing: Working time is only 2 hours; the next stated stage, ready for another coat, is 2–3 hours.

Common mistake: Setting a drink or a lamp on a finish that is dry but not cured; rings and prints stay.

Wood finish

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Two-component water-based polyurethane floor finish, 11465 directions and prepare for hardwood floors and parquet.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Plan the next finish coat

When did you wipe on this coat?
Conditions that affect drying
Where?
Thickness

Stated times

  • Working time ends2 hours
  • Ready for another coat2–3 hours
  • Normal use12 hours
  • Full cure3 days

From LOBA data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: loba.de

Conditions & fine print
  • Stated conditions: 68°F (20°C) and 50% relative humidity
  • Floor times assume the stated temperature and humidity. Cold slabs, thick coats and damp subfloors lengthen them. Follow the current data sheet.
  • Temperature range: 55°F to 80°F
  • Region US. Formulas can differ between countries; check your container.
  • Working time ends: At 68°F and 50% relative humidity.
  • Ready for another coat: At 68°F and 50% relative humidity.
  • Normal use: At 68°F and 50% relative humidity.
  • Full cure: At 68°F and 50% relative humidity.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
LOBA 2K Supra A.T. Satin
Variant
Two-component water-based polyurethane floor finish, 11465
Region
US
Listed use
hardwood floors, parquet
Timed stages recorded
tooling, recoat min, normal use, full cure
Source checked
2026-10-25

Documentation: Technical data sheet · Technical information dated 02/05/2025

Condition attached to the stated time: At 68°F and 50% relative humidity.

About this product

A two-component floor finish with a 2 hour pot life, recoat at 2 to 3 hours, normal traffic at 12 hours and full cure in 3 days. The sheet says not to replace rugs until final cure, and not to apply below 55°F.

Using this specific product

LOBA 2K Supra A.T. Satin is listed here as the Two-component water-based polyurethane floor finish, 11465 version for hardwood floors and parquet. For finishing wood, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Two-component water-based polyurethane floor finish, 11465; related versions can use different timing.
  • For hardwood floors and parquet, pay particular attention to bare-wood preparation, coat thickness and room airflow.
  • At 68°F and 50% relative humidity.

How to check readiness

Check a hidden area for tack, odor and marking before handling or use. The sheet gives a pot life of 2 hours. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required. The sheet gives normal traffic after 12 hours.

Avoid this mistake

Cool, humid rooms and heavy coats can extend the usable wait substantially.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

LOBA states: The sheet gives a pot life of 2 hours. Conditions: At 68°F and 50% relative humidity.. The sheet gives the earliest possible recoating after 2 to 3 hours. Conditions: At 68°F and 50% relative humidity.. The sheet gives normal traffic after 12 hours. Conditions: At 68°F and 50% relative humidity.. The sheet says the floor is fully cured in 3 days. Conditions: At 68°F and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

When can rugs go back on a floor finished with 2K Supra A.T.?

Not before final cure. The sheet says fully cured in 3 days at 68°F and 50% relative humidity, and says not to replace carpets or rugs before the final curing has been reached.

How long does this product take to fully cure?

LOBA states: The sheet says the floor is fully cured in 3 days. Conditions: At 68°F and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

How long do I have to work with this product?

LOBA states: The sheet gives a pot life of 2 hours. Conditions: At 68°F and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Floor times assume the stated temperature and humidity. Cold slabs, thick coats and damp subfloors lengthen them. Follow the current data sheet. Follow the product label for your conditions.

Similar products

All wood finishes