2K Fusion Semi-Gloss
Two-component water-based polyurethane floor finish, 11471 · US · manufacturer-sourced
How long before you can recoat LOBA 2K Fusion Semi-Gloss?
Short answer
Finish build-up
Dry to the touch is not ready for furniture
- Wipe or brush the Two-component water-based polyurethane floor finish, 11471 thin with the grain
- Scuff lightly only after the recoat time
- Wait out full cure before heavy use
This product’s stated stages Quoted at 68°F and 50% humidity
- Working time ends2 hours
- Ready for another coat4 hours
- Recoat window closes1 day
- Light use1 day
- Normal use5 days
Worth noticing: Recoat inside the window: not before 4 hours and not after 1 day.
Common mistake: Setting a drink or a lamp on a finish that is dry but not cured; rings and prints stay.
Coat timeline
Plan the next coat and final use separately
- 1ApplyUse the Two-component water-based polyurethane floor finish, 11471 directions and prepare for hardwood floors and parquet.
- 2Next coatUse the listed recoat milestone; do not substitute touch-dry time.
- 3Normal useWait for the applicable handling, water or cure milestone.
Plan the next finish coat
Your countdown
Stated times
- Working time ends2 hours
- Recoat window closes1 day
- Ready for another coat4 hours
- Light use1 day
- Normal use5 days
From LOBA data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: loba.de
Conditions & fine print
- Stated conditions: 68°F (20°C) and 50% relative humidity
- Floor times assume the stated temperature and humidity. Cold slabs, thick coats and damp subfloors lengthen them. Follow the current data sheet.
- Temperature range: 59°F to 77°F
- Region US. Formulas can differ between countries; check your container.
- Working time ends: At +20°C and 50% relative humidity.
- Recoat window closes: At +20°C and 50% relative humidity.
- Ready for another coat: At +20°C and 50% relative humidity.
- Light use: At +20°C and 50% relative humidity.
- Normal use: At +20°C and 50% relative humidity.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- LOBA 2K Fusion Semi-Gloss
- Variant
- Two-component water-based polyurethane floor finish, 11471
- Region
- US
- Listed use
- hardwood floors, parquet
- Timed stages recorded
- tooling, recoat max, recoat min, light use, normal use
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Technical information dated 21/08/2025
Condition attached to the stated time: At +20°C and 50% relative humidity.
About this product
A 10 to 1 two-component finish with a recoat time of no less than 4 hours that is also its light-foot-traffic and sanding time. Light use is 24 hours and full use and covering 5 days, with early covering possible using LOBA Cover 400.
Using this specific product
LOBA 2K Fusion Semi-Gloss is listed here as the Two-component water-based polyurethane floor finish, 11471 version for hardwood floors and parquet. For finishing wood, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Two-component water-based polyurethane floor finish, 11471; related versions can use different timing.
- For hardwood floors and parquet, pay particular attention to bare-wood preparation, coat thickness and room airflow.
- At +20°C and 50% relative humidity.
How to check readiness
Check a hidden area for tack, odor and marking before handling or use. The sheet says the mix is usable up to 2 hours after mixing. The sheet says to recoat without intermediate sanding within the first 24 hours. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required.
Avoid this mistake
Cool, humid rooms and heavy coats can extend the usable wait substantially.
Compare with similar products
- Compare with Benjamin Moore ARBORCOAT Solid Color StainRecoat: 3–4 h there, 4 h here.
- Compare with Benjamin Moore ARBORCOAT Solid Color StainRecoat: 3–4 h there, 4 h here.
Questions
How long before you can recoat this product?
LOBA states: The sheet says the mix is usable up to 2 hours after mixing. Conditions: At +20°C and 50% relative humidity.. The sheet says to recoat without intermediate sanding within the first 24 hours. Conditions: At +20°C and 50% relative humidity.. The sheet gives a recoat, light foot traffic and intermediate sanding time of no less than 4 hours. Conditions: At +20°C and 50% relative humidity.. The sheet gives light use at 24 hours. Conditions: At +20°C and 50% relative humidity.. The sheet gives full use and covering at 5 days. Conditions: At +20°C and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.
How long before covering a 2K Fusion floor?
The sheet gives full use and covering at 5 days at +20°C and 50% relative humidity. It says early covering is possible with LOBA Cover 400.
How long do I have to work with this product?
LOBA states: The sheet says the mix is usable up to 2 hours after mixing. Conditions: At +20°C and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Floor times assume the stated temperature and humidity. Cold slabs, thick coats and damp subfloors lengthen them. Follow the current data sheet. Follow the product label for your conditions.