LOBA

2K Duo Satin

Two-component water-based polyurethane floor finish, 11466 · US · manufacturer-sourced

Check your container: This countdown is for the Two-component water-based polyurethane floor finish, 11466 variant. Similar-looking versions may have different times.

How long before you can recoat LOBA 2K Duo Satin?

Short answer

Ready for another coat: 2–3 hours after application.
Full cure: 5 days after application.
Wood finish

Finish build-up

Dry to the touch is not ready for furniture

  1. Wipe or brush the Two-component water-based polyurethane floor finish, 11466 thin with the grain
  2. Scuff lightly only after the recoat time
  3. Wait out full cure before heavy use

This product’s stated stages Quoted at 68°F and 50% humidity

  • Working time ends2 hours
  • Ready for another coat2–3 hours
  • Recoat window closes1 day
  • Full cure5 days

Worth noticing: Recoat inside the window: not before 2–3 hours and not after 1 day.

Common mistake: Setting a drink or a lamp on a finish that is dry but not cured; rings and prints stay.

Wood finish

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Two-component water-based polyurethane floor finish, 11466 directions and prepare for hardwood floors and parquet.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Plan the next finish coat

When did you wipe on this coat?
Conditions that affect drying
Where?
Thickness

Stated times

  • Working time ends2 hours
  • Recoat window closes1 day
  • Ready for another coat2–3 hours
  • Full cure5 days

From LOBA data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: loba.de

Conditions & fine print
  • Stated conditions: 68°F (20°C) and 50% relative humidity
  • Floor times assume the stated temperature and humidity. Cold slabs, thick coats and damp subfloors lengthen them. Follow the current data sheet.
  • Temperature range: 55°F to 80°F
  • Region US. Formulas can differ between countries; check your container.
  • Working time ends: At 68°F and 50% relative humidity.
  • Recoat window closes: At 68°F and 50% relative humidity.
  • Ready for another coat: At 68°F and 50% relative humidity.
  • Full cure: At 68°F and 50% relative humidity.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
LOBA 2K Duo Satin
Variant
Two-component water-based polyurethane floor finish, 11466
Region
US
Listed use
hardwood floors, parquet
Timed stages recorded
tooling, recoat max, recoat min, full cure
Source checked
2026-10-25

Documentation: Technical data sheet · Technical information dated 02/05/2025

Condition attached to the stated time: At 68°F and 50% relative humidity.

About this product

The same 2 to 3 hour recoat as 2K Supra A.T., but with a recoat window that closes at 24 hours, after which the floor needs intermediate sanding, and a longer full cure of 5 days instead of 3.

Using this specific product

LOBA 2K Duo Satin is listed here as the Two-component water-based polyurethane floor finish, 11466 version for hardwood floors and parquet. For finishing wood, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Two-component water-based polyurethane floor finish, 11466; related versions can use different timing.
  • For hardwood floors and parquet, pay particular attention to bare-wood preparation, coat thickness and room airflow.
  • At 68°F and 50% relative humidity.

How to check readiness

Check a hidden area for tack, odor and marking before handling or use. The sheet gives a pot life of 2 hours. The sheet says successive coats can go on within 24 hours without intermediate sanding, and after 24 hours sanding is required. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required.

Avoid this mistake

Cool, humid rooms and heavy coats can extend the usable wait substantially.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

LOBA states: The sheet gives a pot life of 2 hours. Conditions: At 68°F and 50% relative humidity.. The sheet says successive coats can go on within 24 hours without intermediate sanding, and after 24 hours sanding is required. Conditions: At 68°F and 50% relative humidity.. The sheet gives the earliest possible recoating after 2 to 3 hours. Conditions: At 68°F and 50% relative humidity.. The sheet says the floor is fully cured after 5 days. Conditions: At 68°F and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

What if I miss the 24 hour window for the next coat of 2K Duo?

The sheet says successive coats can go on within 24 hours without intermediate sanding. After 24 hours, intermediate sanding is required.

How long does this product take to fully cure?

LOBA states: The sheet says the floor is fully cured after 5 days. Conditions: At 68°F and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

How long do I have to work with this product?

LOBA states: The sheet gives a pot life of 2 hours. Conditions: At 68°F and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Floor times assume the stated temperature and humidity. Cold slabs, thick coats and damp subfloors lengthen them. Follow the current data sheet. Follow the product label for your conditions.

Similar products

All wood finishes