Pro Series Hardwood Floor Refresher
Water-based floor refresher coat · US · manufacturer-sourced
How long before you can recoat Bona Pro Series Hardwood Floor Refresher?
Short answer
Finish build-up
Dry to the touch is not ready for furniture
- Wipe or brush the Water-based floor refresher coat thin with the grain
- Scuff lightly only after the recoat time
- Wait out full cure before heavy use
This product’s stated stages Quoted at 73°F
- Light foot traffic1 hour
- Ready for another coat2 hours
- Heavy traffic1 day
- Full cure7 days
Worth noticing: You can recoat at 2 hours, but the film is not fully cured until 7 days.
Common mistake: Setting a drink or a lamp on a finish that is dry but not cured; rings and prints stay.
Coat timeline
Plan the next coat and final use separately
- 1ApplyUse the Water-based floor refresher coat directions and prepare for hardwood floors and floor maintenance.
- 2Next coatUse the listed recoat milestone; do not substitute touch-dry time.
- 3Normal useWait for the applicable handling, water or cure milestone.
Plan the next finish coat
Your countdown
Stated times
- Ready for another coat2 hours
- Light foot traffic1 hour
- Heavy traffic1 day
- Full cure7 days
From Bona data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: bona.com
Conditions & fine print
- Stated conditions: 73°F (23°C)
- Floor times assume the stated temperature and humidity. Cold slabs, thick coats and damp subfloors lengthen them. Follow the current data sheet.
- Region US. Formulas can differ between countries; check your container.
- Ready for another coat: The source gives no conditions for this time.
- Light foot traffic: The source gives no conditions for this time.
- Heavy traffic: The source gives no conditions for this time.
- Full cure: The source gives no conditions for this time.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Bona Pro Series Hardwood Floor Refresher
- Variant
- Water-based floor refresher coat
- Region
- US
- Listed use
- hardwood floors, floor maintenance
- Timed stages recorded
- recoat min, light foot, heavy traffic, full cure
- Source checked
- 2026-10-25
Documentation: Technical data sheet copy · Data sheet dated 7/2021
Condition attached to the stated time: The source gives no conditions for this time.
About this product
A maintenance coat with a quick schedule: walk on it after 1 hour, a second coat after 2, heavy foot traffic after 24, and about 90% cure at 24 hours and 100% at 1 week. The sheet says to reapply every 3 to 4 months.
Using this specific product
Bona Pro Series Hardwood Floor Refresher is listed here as the Water-based floor refresher coat version for hardwood floors and floor maintenance. For finishing wood, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Water-based floor refresher coat; related versions can use different timing.
- For hardwood floors and floor maintenance, pay particular attention to bare-wood preparation, coat thickness and room airflow.
- The source gives no conditions for this time.
How to check readiness
Check a hidden area for tack, odor and marking before handling or use. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required. Try a protected edge first and avoid turning, dragging or concentrated loads. Open the area gradually and keep heavy or hot tires off until the full stated milestone.
Avoid this mistake
Cool, humid rooms and heavy coats can extend the usable wait substantially.
Compare with similar products
- Compare with General Finishes High Performance Water Based TopcoatRecoat: 2 h there, 2 h here.
- Compare with Haymes Water-Based Decking FinishRecoat: 2 h there, 2 h here.
Questions
How long before you can recoat this product?
Bona states: The sheet says a second coat can be applied after 2 hours for a glossier look. Conditions: The source gives no conditions for this time.. The sheet says to allow at least 1 hour before walking on the floor. Conditions: The source gives no conditions for this time.. The sheet says to allow 24 hours before heavy foot traffic. Conditions: The source gives no conditions for this time.. The sheet says the coating is about 90% cured after 24 hours and 100% cured after 1 week. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
How long before heavy foot traffic on a floor with Bona Refresher?
The sheet says to allow 24 hours before heavy foot traffic and to allow at least 1 hour before walking on the floor.
How long does this product take to fully cure?
Bona states: The sheet says the coating is about 90% cured after 24 hours and 100% cured after 1 week. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
How long before I can walk on tile set with this product?
Bona states: The sheet says to allow at least 1 hour before walking on the floor. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
How long before heavy traffic is safe on this product?
Bona states: The sheet says to allow 24 hours before heavy foot traffic. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Floor times assume the stated temperature and humidity. Cold slabs, thick coats and damp subfloors lengthen them. Follow the current data sheet. Follow the product label for your conditions.