Glidden (PPG)

Spray Master DTM Dryfall Flat 10112

Dry-fall flat coating, Canadian sheet · CA · manufacturer-sourced

Check your container: This countdown is for the Dry-fall flat coating, Canadian sheet variant. Similar-looking versions may have different times.

How long before you can recoat Glidden (PPG) Spray Master DTM Dryfall Flat 10112?

Short answer

Ready for another coat: 4 hours after application.
Safe to touch: 30 minutes after application.
Paint, primer & patch

Coat-by-coat plan

Touch-dry, recoat and washable are three different dates

  1. Cut in and roll the Dry-fall flat coating, Canadian sheet in even coats
  2. Wait for the recoat time, not touch-dry
  3. Hold off scrubbing until the cure time

This product’s stated stages Quoted at 77°F and 50% humidity

  • Safe to touch30 minutes
  • Ready for another coat4 hours
  • Curing period2 weeks

Worth noticing: Safe to touch at 30 minutes; curing period at 2 weeks.

Common mistake: Closing the door or hanging pictures once the wall feels dry, long before the film has hardened.

Paint, primer & patch

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Dry-fall flat coating, Canadian sheet directions and prepare for ceilings, warehouses, and steel decking.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Plan the next coat

When did this coat go on?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to touch30 minutes
  • Ready for another coat4 hours
  • Curing period complete14 days

From Glidden (PPG) data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: glidden.com

Conditions & fine print
  • Stated conditions: 77°F (25°C) and 50% relative humidity
  • Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label.
  • Region CA. Formulas can differ between countries; check your container.
  • Safe to touch: At 77°F (25°C) and 50% relative humidity.
  • Ready for another coat: At 77°F (25°C) and 50% relative humidity.
  • Curing period complete: At 77°F (25°C) and 50% relative humidity.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Glidden (PPG) Spray Master DTM Dryfall Flat 10112
Variant
Dry-fall flat coating, Canadian sheet
Region
CA
Listed use
ceilings, warehouses, steel decking
Timed stages recorded
touch, recoat min, cure period
Source checked
2026-10-25

Documentation: Technical data sheet copy · Data sheet, 11/2020 (Canada)

Condition attached to the stated time: At 77°F (25°C) and 50% relative humidity.

About this product

A dry-fall coating, made so overspray dusts off before it lands. Its sheet allows a 4 hour recoat but asks for 14 days before cleaning, the longest cleaning wait among the Glidden Canada sheets in this release.

Using this specific product

Glidden (PPG) Spray Master DTM Dryfall Flat 10112 is listed here as the Dry-fall flat coating, Canadian sheet version for ceilings, warehouses, and steel decking. For painting, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Dry-fall flat coating, Canadian sheet; related versions can use different timing.
  • For ceilings, warehouses, and steel decking, pay particular attention to surface preparation, coat thickness and ventilation.
  • At 77°F (25°C) and 50% relative humidity.

How to check readiness

Test an inconspicuous area for firmness and blocking before normal use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required. The data sheet says to wait 14 days before cleaning.

Avoid this mistake

Recoating too early can trap solvent or water; waiting much longer may require scuffing under the label directions.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

Glidden (PPG) states: The data sheet gives 30 minutes to touch. Conditions: At 77°F (25°C) and 50% relative humidity.. The data sheet gives 4 hours before recoating. Conditions: At 77°F (25°C) and 50% relative humidity.. The data sheet says to wait 14 days before cleaning. Conditions: At 77°F (25°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

How long before a dry-fall ceiling coated with Spray Master 10112 can be cleaned?

The data sheet says 14 days. It is touch dry in 30 minutes and can be recoated in 4 hours at 77°F and 50% humidity.

How long until this product is safe to touch?

Glidden (PPG) states: The data sheet gives 30 minutes to touch. Conditions: At 77°F (25°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label. Follow the product label for your conditions.

Similar products

All paints, primers and patching