Glidden (PPG)

Essentials Exterior 100% Acrylic Flat (GLE-5011N)

Exterior house · US · manufacturer-sourced

Check your container: This countdown is for the Exterior house variant. Similar-looking versions may have different times.

How long before you can recoat Glidden (PPG) Essentials Exterior 100% Acrylic Flat (GLE-5011N)?

Short answer

Ready for another coat: 4 hours after application.
Safe to touch: 30 minutes after application.
Paint, primer & patch

Coat-by-coat plan

Touch-dry, recoat and washable are three different dates

  1. Cut in and roll the Exterior house in even coats
  2. Wait for the recoat time, not touch-dry
  3. Hold off scrubbing until the cure time

This product’s stated stages Quoted at 77°F and 50% humidity

  • Safe to touch30 minutes
  • Ready for another coat4 hours
  • Full cure30 days

Worth noticing: Touch-dry comes at 30 minutes, but full cure is 30 days, about 1440 times longer.

Common mistake: Closing the door or hanging pictures once the wall feels dry, long before the film has hardened.

Paint, primer & patch

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Exterior house directions and prepare for exterior paint and siding.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Plan the next coat

When did this coat go on?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to touch30 minutes
  • Ready for another coat4 hours
  • Full cure30 days

From Glidden (PPG) data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: glidden.com

Conditions & fine print
  • Stated conditions: 77°F (25°C) and 50% relative humidity
  • Drying and recoat times change with temperature, humidity, film thickness and airflow. Check the current can label for your exact color base and sheen. The bulletin says to apply at 35°F or higher and at least 5°F above the dew point.
  • Apply at 35°F or above
  • Region US. Formulas can differ between countries; check your container.
  • Safe to touch: At 77°F (25°C) and 50% relative humidity.
  • Ready for another coat: At 77°F (25°C) and 50% relative humidity.
  • Full cure: At 77°F (25°C) and 50% relative humidity.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Glidden (PPG) Essentials Exterior 100% Acrylic Flat (GLE-5011N)
Variant
Exterior house
Region
US
Listed use
exterior paint, siding
Timed stages recorded
touch, recoat min, full cure
Source checked
2026-10-25

Documentation: Technical data sheet · 1/2018

Condition attached to the stated time: At 77°F (25°C) and 50% relative humidity.

About this product

Essentials Exterior 100% Acrylic Flat (GLE-5011N) is a paint, primer & patch product from Glidden (PPG), listed for exterior paint, siding. Its times are stated under: At 77°F (25°C) and 50% relative humidity. Its recoat time of 4 hours is shorter than 10% of the 231 paint, primer & patch products here that list one.

Using this specific product

Glidden (PPG) Essentials Exterior 100% Acrylic Flat (GLE-5011N) is listed here as the Exterior house version for exterior paint and siding. For painting, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Exterior house; related versions can use different timing.
  • For exterior paint and siding, pay particular attention to surface preparation, coat thickness and ventilation.
  • At 77°F (25°C) and 50% relative humidity.

How to check readiness

Test an inconspicuous area for firmness and blocking before normal use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required. Reserve full cure for demanding use, chemicals, washing, immersion or load—not merely gentle handling.

Avoid this mistake

Recoating too early can trap solvent or water; waiting much longer may require scuffing under the label directions.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

Glidden (PPG) states: The technical data bulletin gives 30 minutes to touch. Conditions: At 77°F (25°C) and 50% relative humidity.. The technical data bulletin gives 4 hours to recoat. Conditions: At 77°F (25°C) and 50% relative humidity.. The technical data bulletin gives 30 days for the paint film to cure fully. Conditions: At 77°F (25°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

How does Essentials Exterior 100% Acrylic Flat (GLE-5011N) compare with other paint, primer & patch products?

Glidden (PPG) states 4 hours for recoat, which is slower than the typical paint, primer & patch product here (median 2 hours across 231 products). The quickest listed is Valspar Latex Field Marking Paint at 30 minutes; the slowest is Rust-Oleum Stops Rust Clean Metal Primer Spray at 2 days.

What conditions do the stated times for Essentials Exterior 100% Acrylic Flat (GLE-5011N) assume?

Stated conditions: At 77°F (25°C) and 50% relative humidity. Baseline temperature: 77°F and 50% relative humidity. Application temperature: 35°F or higher. Cooler, damper or thicker applications usually take longer.

Is there a faster Glidden (PPG) paint, primer & patch option?

Yes. Among the 7 Glidden (PPG) paint, primer & patch products listed here, Glidden (PPG) Diamond Interior Paint + Primer Semi-Gloss (PPG53-510) states a shorter recoat time (2 hours versus 4 hours).

How long does this product take to fully cure?

Glidden (PPG) states: The technical data bulletin gives 30 days for the paint film to cure fully. Conditions: At 77°F (25°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

How long until this product is safe to touch?

Glidden (PPG) states: The technical data bulletin gives 30 minutes to touch. Conditions: At 77°F (25°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Drying and recoat times change with temperature, humidity, film thickness and airflow. Check the current can label for your exact color base and sheen. The bulletin says to apply at 35°F or higher and at least 5°F above the dew point. Follow the product label for your conditions.

Similar products

All paints, primers and patching