Glidden (PPG)

Porch & Floor Interior/Exterior Satin (PF9010)

Porch and floor · US · manufacturer-sourced

Check your container: This countdown is for the Porch and floor variant. Similar-looking versions may have different times.

How long before you can recoat Glidden (PPG) Porch & Floor Interior/Exterior Satin (PF9010)?

Short answer

Ready for another coat: 4 hours after application.
Safe to touch: 1 hour after application.
Paint, primer & patch

Coat-by-coat plan

Touch-dry, recoat and washable are three different dates

  1. Cut in and roll the Porch and floor in even coats
  2. Wait for the recoat time, not touch-dry
  3. Hold off scrubbing until the cure time

This product’s stated stages Quoted at 77°F and 50% humidity

  • Safe to touch1 hour
  • Ready for another coat4 hours
  • Return to service1 day

Worth noticing: Safe to touch at 1 hour; return to service at 1 day.

Common mistake: Closing the door or hanging pictures once the wall feels dry, long before the film has hardened.

Paint, primer & patch

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Porch and floor directions and prepare for porch paint, floor paint, and concrete.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Plan the next coat

When did this coat go on?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to touch1 hour
  • Ready for another coat4 hours
  • Return to service1 day

From Glidden (PPG) data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: glidden.com

Conditions & fine print
  • Stated conditions: 77°F (25°C) and 50% relative humidity
  • Drying and recoat times change with temperature, humidity, film thickness and airflow. Check the current can label for your exact color base and sheen. The bulletin says to apply above 50°F.
  • Apply at 50°F or above
  • Region US. Formulas can differ between countries; check your container.
  • Safe to touch: At 77°F (25°C) and 50% relative humidity.
  • Ready for another coat: At 77°F (25°C) and 50% relative humidity.
  • Return to service: At 77°F (25°C) and 50% relative humidity.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Glidden (PPG) Porch & Floor Interior/Exterior Satin (PF9010)
Variant
Porch and floor
Region
US
Listed use
porch paint, floor paint, concrete
Timed stages recorded
touch, recoat min, return service
Source checked
2026-10-25

Documentation: Technical data sheet · 10/2024

Condition attached to the stated time: At 77°F (25°C) and 50% relative humidity.

About this product

Porch & Floor Interior/Exterior Satin (PF9010) is a paint, primer & patch product from Glidden (PPG), listed for porch paint, floor paint, concrete. Its times are stated under: At 77°F (25°C) and 50% relative humidity. Its recoat time of 4 hours is shorter than 10% of the 231 paint, primer & patch products here that list one.

Using this specific product

Glidden (PPG) Porch & Floor Interior/Exterior Satin (PF9010) is listed here as the Porch and floor version for porch paint, floor paint, and concrete. For painting, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Porch and floor; related versions can use different timing.
  • For porch paint, floor paint, and concrete, pay particular attention to surface preparation, coat thickness and ventilation.
  • At 77°F (25°C) and 50% relative humidity.

How to check readiness

Test an inconspicuous area for firmness and blocking before normal use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required. The technical data bulletin gives 24 hours before the floor goes into service.

Avoid this mistake

Recoating too early can trap solvent or water; waiting much longer may require scuffing under the label directions.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

Glidden (PPG) states: The technical data bulletin gives 1 hour to touch. Conditions: At 77°F (25°C) and 50% relative humidity.. The technical data bulletin gives 4 hours to recoat. Conditions: At 77°F (25°C) and 50% relative humidity.. The technical data bulletin gives 24 hours before the floor goes into service. Conditions: At 77°F (25°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

How does Porch & Floor Interior/Exterior Satin (PF9010) compare with other paint, primer & patch products?

Glidden (PPG) states 4 hours for recoat, which is slower than the typical paint, primer & patch product here (median 2 hours across 231 products). The quickest listed is Valspar Latex Field Marking Paint at 30 minutes; the slowest is Rust-Oleum Stops Rust Clean Metal Primer Spray at 2 days.

What conditions do the stated times for Porch & Floor Interior/Exterior Satin (PF9010) assume?

Stated conditions: At 77°F (25°C) and 50% relative humidity. Baseline temperature: 77°F and 50% relative humidity. Application temperature: 50°F or higher. Cooler, damper or thicker applications usually take longer.

Is there a faster Glidden (PPG) paint, primer & patch option?

Yes. Among the 7 Glidden (PPG) paint, primer & patch products listed here, Glidden (PPG) Diamond Interior Paint + Primer Semi-Gloss (PPG53-510) states a shorter recoat time (2 hours versus 4 hours).

How long until I can put this product into service?

Glidden (PPG) states: The technical data bulletin gives 24 hours before the floor goes into service. Conditions: At 77°F (25°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

How long until this product is safe to touch?

Glidden (PPG) states: The technical data bulletin gives 1 hour to touch. Conditions: At 77°F (25°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Drying and recoat times change with temperature, humidity, film thickness and airflow. Check the current can label for your exact color base and sheen. The bulletin says to apply above 50°F. Follow the product label for your conditions.

Similar products

All paints, primers and patching