Glidden (PPG)

Dryfall Alkyd 10170

Alkyd dry-fall ceiling and structure paint (Canada sheet) · CA · manufacturer-sourced

Check your container: This countdown is for the Alkyd dry-fall ceiling and structure paint (Canada sheet) variant. Similar-looking versions may have different times.

How long before you can recoat Glidden (PPG) Dryfall Alkyd 10170?

Short answer

Ready for another coat: 6–8 hours after application.
Safe to touch: 30 minutes after application.
Paint, primer & patch

Coat-by-coat plan

Touch-dry, recoat and washable are three different dates

  1. Cut in and roll the Alkyd dry-fall ceiling and structure paint (Canada sheet) in even coats
  2. Wait for the recoat time, not touch-dry
  3. Hold off scrubbing until the cure time

This product’s stated stages Quoted at 77°F and 50% humidity

  • Safe to touch30 minutes
  • Ready for another coat6–8 hours
  • Curing period7 days

Worth noticing: Safe to touch at 30 minutes; curing period at 7 days.

Common mistake: Closing the door or hanging pictures once the wall feels dry, long before the film has hardened.

Plan the next coat

When did this coat go on?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to touch30 minutes
  • Ready for another coat6–8 hours
  • Curing period complete7 days

From Glidden (PPG) data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: glidden.com

Conditions & fine print
  • Stated conditions: 77°F (25°C) and 50% relative humidity
  • Paint times are for the stated temperature and humidity. Cold, damp rooms and thick films lengthen them. Follow the current data sheet and label.
  • Region CA. Formulas can differ between countries; check your container.
  • Safe to touch: At 77°F (25°C) and 50% relative humidity.
  • Ready for another coat: At 77°F (25°C) and 50% relative humidity. The sheet says to double times above 50% humidity.
  • Curing period complete: At 77°F (25°C) and 50% relative humidity.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Glidden (PPG) Dryfall Alkyd 10170
Variant
Alkyd dry-fall ceiling and structure paint (Canada sheet)
Region
CA
Listed use
exposed ceilings, ductwork, warehouse structure
Timed stages recorded
touch, recoat min, cure period
Source checked
2026-10-25

Documentation: Technical data sheet · Technical data sheet 10170, 06/2022

Condition attached to the stated time: At 77°F (25°C) and 50% relative humidity.

About this product

A dry-fall alkyd for sprayed overheads, where overspray dries to dust before it lands. Recoat takes 6 to 8 hours, longer than the latex dry-falls, and the sheet doubles that above 50% humidity.

Using this specific product

Glidden (PPG) Dryfall Alkyd 10170 is listed here as the Alkyd dry-fall ceiling and structure paint (Canada sheet) version for exposed ceilings, ductwork, and warehouse structure. For painting, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Alkyd dry-fall ceiling and structure paint (Canada sheet); related versions can use different timing.
  • For exposed ceilings, ductwork, and warehouse structure, pay particular attention to surface preparation, coat thickness and ventilation.
  • At 77°F (25°C) and 50% relative humidity. At 77°F (25°C) and 50% relative humidity. The sheet says to double times above 50% humidity.

How to check readiness

Test an inconspicuous area for firmness and blocking before normal use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required. The sheet gives 7 days before cleaning.

Avoid this mistake

Recoating too early can trap solvent or water; waiting much longer may require scuffing under the label directions.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

Glidden (PPG) states: The sheet gives touch dry in 30 minutes. Conditions: At 77°F (25°C) and 50% relative humidity.. The sheet gives recoat in 6 to 8 hours. Conditions: At 77°F (25°C) and 50% relative humidity. The sheet says to double times above 50% humidity.. The sheet gives 7 days before cleaning. Conditions: At 77°F (25°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

How long between coats of Dryfall 10170?

The sheet gives 6 to 8 hours at 77°F and 50% humidity, doubled when humidity is above 50%.

How long until this product is safe to touch?

Glidden (PPG) states: The sheet gives touch dry in 30 minutes. Conditions: At 77°F (25°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Paint times are for the stated temperature and humidity. Cold, damp rooms and thick films lengthen them. Follow the current data sheet and label. Follow the product label for your conditions.

Similar products

All paints, primers and patching