Benjamin Moore

Coronado FinalTouch

Interior latex touch-up paint · US · manufacturer-sourced

Check your container: This countdown is for the Interior latex touch-up paint variant. Similar-looking versions may have different times.

How long before you can recoat Benjamin Moore Coronado FinalTouch?

Short answer

Ready for another coat: 4 hours after application.
Tack-free: 30 minutes after application.
Paint, primer & patch

Coat-by-coat plan

Touch-dry, recoat and washable are three different dates

  1. Cut in and roll the Interior latex touch-up paint in even coats
  2. Wait for the recoat time, not touch-dry
  3. Hold off scrubbing until the cure time

This product’s stated stages Quoted at 77°F and 50% humidity

  • Tack-free30 minutes
  • Ready for another coat4 hours

Worth noticing: Tack-free at 30 minutes; ready for another coat at 4 hours.

Common mistake: Closing the door or hanging pictures once the wall feels dry, long before the film has hardened.

Paint, primer & patch

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Interior latex touch-up paint directions and prepare for touch-ups, interior walls, and small repairs.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Plan the next coat

When did this coat go on?
Conditions that affect drying
Where?
Thickness

Stated times

  • Tack-free30 minutes
  • Ready for another coat4 hours

From Benjamin Moore data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: benjaminmoore.com

Conditions & fine print
  • Stated conditions: 77°F (25°C) and 50% relative humidity
  • Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label.
  • Region US. Formulas can differ between countries; check your container.
  • Tack-free: At 77°F (25°C) and 50% relative humidity.
  • Ready for another coat: At 77°F (25°C) and 50% relative humidity.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Benjamin Moore Coronado FinalTouch
Variant
Interior latex touch-up paint
Region
US
Listed use
touch-ups, interior walls, small repairs
Timed stages recorded
tack free, recoat min
Source checked
2026-10-25

Documentation: Technical data sheet copy · Sell sheet, dated 11/23

Condition attached to the stated time: At 77°F (25°C) and 50% relative humidity.

About this product

A touch-up paint, so the time that matters is how soon a second pass can go on. The sell sheet gives 30 minutes tack-free and 4 hours to recoat, the same 4 hours as PPG Timeless.

Using this specific product

Benjamin Moore Coronado FinalTouch is listed here as the Interior latex touch-up paint version for touch-ups, interior walls, and small repairs. For painting, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Interior latex touch-up paint; related versions can use different timing.
  • For touch-ups, interior walls, and small repairs, pay particular attention to surface preparation, coat thickness and ventilation.
  • At 77°F (25°C) and 50% relative humidity.

How to check readiness

Test an inconspicuous area for firmness and blocking before normal use. The sell sheet gives a tack-free time of 30 minutes. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required.

Avoid this mistake

Recoating too early can trap solvent or water; waiting much longer may require scuffing under the label directions.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

Benjamin Moore states: The sell sheet gives a tack-free time of 30 minutes. Conditions: At 77°F (25°C) and 50% relative humidity.. The sell sheet gives 4 hours before recoating. Conditions: At 77°F (25°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

How long between touch-up coats with Coronado FinalTouch?

The sell sheet gives 4 hours to recoat and a 30 minute tack-free time at 77°F and 50% humidity.

How long until this product is tack-free?

Benjamin Moore states: The sell sheet gives a tack-free time of 30 minutes. Conditions: At 77°F (25°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label. Follow the product label for your conditions.

Similar products

All paints, primers and patching