Tikkurila

Tixomatt

Matt interior wall and ceiling paint (UK sheet) · GB · manufacturer-sourced

Check your container: This countdown is for the Matt interior wall and ceiling paint (UK sheet) variant. Similar-looking versions may have different times.

How long before you can wash fabric after using Tikkurila Tixomatt?

Short answer

Ready for first wash: 30 days after application.
Ready for another coat: 1 day after application.
Paint, primer & patch

Coat-by-coat plan

Touch-dry, recoat and washable are three different dates

  1. Cut in and roll the Matt interior wall and ceiling paint (UK sheet) in even coats
  2. Wait for the recoat time, not touch-dry
  3. Hold off scrubbing until the cure time

This product’s stated stages Quoted at 73°F

  • Safe to touch1 hour
  • Ready for another coat1 day
  • Wash-ready30 days
  • Full cure30 days

Worth noticing: Touch-dry comes at 1 hour, but full cure is 30 days, about 720 times longer.

Common mistake: Closing the door or hanging pictures once the wall feels dry, long before the film has hardened.

Paint, primer & patch

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Matt interior wall and ceiling paint (UK sheet) directions and prepare for wall paint and ceiling paint.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Plan the next coat

When did this coat go on?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to touch1 hour
  • Ready for another coat1 day
  • Ready for first wash30 days
  • Full cure30 days

From Tikkurila data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: tikkurila.co.uk

Conditions & fine print
  • Stated conditions: 73°F (23°C)
  • Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label.
  • Region GB. Formulas can differ between countries; check your container.
  • Safe to touch: The source gives no conditions for this time.
  • Ready for another coat: The source gives no conditions for this time.
  • Ready for first wash: The source gives no conditions for this time.
  • Full cure: Gentle wiping only until then.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Tikkurila Tixomatt
Variant
Matt interior wall and ceiling paint (UK sheet)
Region
GB
Listed use
wall paint, ceiling paint
Timed stages recorded
touch, recoat min, wash ready, full cure
Source checked
2026-10-25

Documentation: Technical data sheet · Product data sheet, 26.07.2022

Condition attached to the stated time: The source gives no conditions for this time.

About this product

A matt interior paint that dries to dust-free in an hour and takes a second coat the next day, but only hardens fully after about a month. Cleaning waits for the same month.

Using this specific product

Tikkurila Tixomatt is listed here as the Matt interior wall and ceiling paint (UK sheet) version for wall paint and ceiling paint. For painting, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Matt interior wall and ceiling paint (UK sheet); related versions can use different timing.
  • For wall paint and ceiling paint, pay particular attention to surface preparation, coat thickness and ventilation.
  • The source gives no conditions for this time. Gentle wiping only until then.

How to check readiness

Test an inconspicuous area for firmness and blocking before normal use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required. The sheet says clean the surface after about 1 month.

Avoid this mistake

Recoating too early can trap solvent or water; waiting much longer may require scuffing under the label directions.

Compare with similar products

Keep going

Questions

How long before you can wash fabric after using this product?

Tikkurila states: The sheet gives dust dry in 1 hour. Conditions: The source gives no conditions for this time.. The sheet says recoat the next day. Conditions: The source gives no conditions for this time.. The sheet says clean the surface after about 1 month. Conditions: The source gives no conditions for this time.. The sheet gives final hardness after about 1 month. Conditions: Gentle wiping only until then.. These are the manufacturer’s stated times, not a guarantee.

When can a Tixomatt wall be washed?

The sheet says clean after about 1 month, when the film reaches final hardness.

How long does this product take to fully cure?

Tikkurila states: The sheet gives final hardness after about 1 month. Conditions: Gentle wiping only until then.. These are the manufacturer’s stated times, not a guarantee.

How long before I can apply a second coat of this product?

Tikkurila states: The sheet says recoat the next day. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

How long until this product is safe to touch?

Tikkurila states: The sheet gives dust dry in 1 hour. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label. Follow the product label for your conditions.

Similar products

All paints, primers and patching