Stops Rust Protective Enamel (Brush-On)

Oil-based (all colors) · US · not yet reviewed

Ready for another coat: 1 day after application.

Safe to touch: 2–4 hours after application.

Start the clock

From Rust-Oleum data sheet · checked 2026-10-24. Anything not listed isn’t stated by the manufacturer.

Conditions & fine print

Stated conditions: 70°F and 50% relative humidity (table: 70–80°F)
Allow more time at cooler temperatures. Apply when humidity is below 85%.
Temperature range: 50°F to 90°F
Region US. Formulas can differ between countries; check your container.
Safe to touch: 70°F and 50% RH
Safe to handle: 70°F and 50% RH
Ready for another coat: 70°F and 50% RH
Fully dry: 70°F and 50% RH
Entered from the manufacturer source; second review pending. Report outdated information
Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

How long before Stops Rust Protective Enamel (Brush-On) is ready for another coat?

Rust-Oleum states: Recoat after 24 hours. Conditions: 70°F and 50% RH. This is the manufacturer’s stated time, not a guarantee.

How long before Stops Rust Protective Enamel (Brush-On) is safe to touch?

Rust-Oleum states: Dries to the touch in 2–4 hours. Conditions: 70°F and 50% RH. This is the manufacturer’s stated time, not a guarantee.