Sikafloor-261 CA Thixo Lite
Thixotropic epoxy floor coating, Canadian sheet · CA · manufacturer-sourced
How long before you can recoat Sikafloor-261 CA Thixo Lite?
Short answer
Return-to-use gates
Walk, furniture and full traffic open at different times
- Apply the Thixotropic epoxy floor coating, Canadian sheet to a clean, dry subfloor
- Stay off until the foot-traffic time
- Bring in furniture and heavy use later
This product’s stated stages Quoted at 68°F
- Working time ends40 minutes
- Ready for another coat8 hours
- Recoat window closes2 days
- Light foot traffic2 days
- Full cure7 days
Worth noticing: Recoat inside the window: not before 8 hours and not after 2 days.
Common mistake: Moving furniture back the day after, while the surface is still soft.
Return-to-use gates
Open the surface gradually instead of treating cure as one moment
Time returning to use
Your countdown
Stated times
- Working time ends40 minutes
- Recoat window closes2 days
- Ready for another coat8 hours
- Light foot traffic2 days
- Full cure7 days
From Sika data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: usa.sika.com
Conditions & fine print
- Stated conditions: 68°F (20°C)
- Pot life, recoat and traffic times depend on temperature and film thickness. Follow the current data sheet.
- Region CA. Formulas can differ between countries; check your container.
- Working time ends: About 60 minutes at 10°C and about 15 minutes at 30°C.
- Recoat window closes: About 72 hours at 10°C and about 24 hours at 30°C.
- Ready for another coat: About 30 hours at 10°C and about 6 hours at 30°C.
- Light foot traffic: About 4 days at 10°C and about 2 days at 30°C.
- Full cure: About 10 days at 10°C and about 5 days at 30°C.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Sika Sikafloor-261 CA Thixo Lite
- Variant
- Thixotropic epoxy floor coating, Canadian sheet
- Region
- CA
- Listed use
- floor coating, epoxy, concrete floors
- Timed stages recorded
- tooling, recoat max, recoat min, light foot, full cure
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Version 01.02, September 2024 (Canada)
Condition attached to the stated time: About 60 minutes at 10°C and about 15 minutes at 30°C.
About this product
The Canadian sheet for a thixotropic epoxy. It uses a 250 g pot-life test and metric temperatures, and the cold-weather penalty is steep: the minimum recoat is about 30 hours at 10°C against 8 hours at 20°C.
Using this specific product
Sika Sikafloor-261 CA Thixo Lite is listed here as the Thixotropic epoxy floor coating, Canadian sheet version for floor coating, epoxy, and concrete floors. For installing or finishing a floor, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Thixotropic epoxy floor coating, Canadian sheet; related versions can use different timing.
- For floor coating, epoxy, and concrete floors, pay particular attention to subfloor condition, trowel coverage, room temperature and traffic plan.
- About 60 minutes at 10°C and about 15 minutes at 30°C. About 72 hours at 10°C and about 24 hours at 30°C. About 30 hours at 10°C and about 6 hours at 30°C. About 4 days at 10°C and about 2 days at 30°C. About 10 days at 10°C and about 5 days at 30°C.
How to check readiness
Test the least-ventilated area before walking, covering or replacing furniture. The data sheet gives a pot life of about 40 minutes for a 250 g mix at 20°C. The data sheet gives a maximum recoat of about 48 hours at 20°C. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required.
Avoid this mistake
Foot traffic, furniture and rugs can have different return times.
Compare with similar products
- Compare with Jotun Jotafloor TopcoatRecoat: 7.5 h there, 8 h here.
- Compare with LATICRETE SPARTACOTE Epoxy MembraneRecoat: 7 h there, 8 h here.
Questions
How long before you can recoat this product?
Sika states: The data sheet gives a pot life of about 40 minutes for a 250 g mix at 20°C. Conditions: About 60 minutes at 10°C and about 15 minutes at 30°C.. The data sheet gives a maximum recoat of about 48 hours at 20°C. Conditions: About 72 hours at 10°C and about 24 hours at 30°C.. The data sheet gives a minimum recoat of about 8 hours at 20°C. Conditions: About 30 hours at 10°C and about 6 hours at 30°C.. The data sheet gives about 2 days to light traffic at 20°C. Conditions: About 4 days at 10°C and about 2 days at 30°C.. The data sheet gives about 7 days to full cure at 20°C. Conditions: About 10 days at 10°C and about 5 days at 30°C.. These are the manufacturer’s stated times, not a guarantee.
How cold is too cold for Sikafloor-261 CA Thixo Lite?
The data sheet's table starts at 10°C, where the pot life is about 60 minutes and the minimum recoat is about 30 hours. At 30°C the pot life drops to about 15 minutes.
How long does this product take to fully cure?
Sika states: The data sheet gives about 7 days to full cure at 20°C. Conditions: About 10 days at 10°C and about 5 days at 30°C.. These are the manufacturer’s stated times, not a guarantee.
How long do I have to work with this product?
Sika states: The data sheet gives a pot life of about 40 minutes for a 250 g mix at 20°C. Conditions: About 60 minutes at 10°C and about 15 minutes at 30°C.. These are the manufacturer’s stated times, not a guarantee.
How long before I can walk on tile set with this product?
Sika states: The data sheet gives about 2 days to light traffic at 20°C. Conditions: About 4 days at 10°C and about 2 days at 30°C.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Pot life, recoat and traffic times depend on temperature and film thickness. Follow the current data sheet. Follow the product label for your conditions.