Sikafloor-219 UTE
Two-part epoxy floor coating · US · manufacturer-sourced
How long before you can recoat Sikafloor-219 UTE?
Short answer
Return-to-use gates
Walk, furniture and full traffic open at different times
- Apply the Two-part epoxy floor coating to a clean, dry subfloor
- Stay off until the foot-traffic time
- Bring in furniture and heavy use later
This product’s stated stages Quoted at 73°F
- Working time ends26 minutes
- Ready for another coat1 day
- Recoat window closes36 hours
- Light foot traffic2 days
- Normal use5 days
Worth noticing: Recoat inside the window: not before 1 day and not after 36 hours.
Common mistake: Moving furniture back the day after, while the surface is still soft.
Return-to-use gates
Open the surface gradually instead of treating cure as one moment
Time returning to use
Your countdown
Stated times
- Working time ends26 minutes
- Recoat window closes36 hours
- Ready for another coat1 day
- Light foot traffic2 days
- Normal use5 days
From Sika product page · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: usa.sika.com
Conditions & fine print
- Stated conditions: 73°F (23°C)
- Pot life, recoat and traffic times depend on temperature and film thickness. Follow the current data sheet.
- Region US. Formulas can differ between countries; check your container.
- Working time ends: The source gives no conditions for this time.
- Recoat window closes: About 72 hours at 50°F and about 24 hours at 86°F.
- Ready for another coat: About 48 hours at 50°F and about 16 hours at 86°F.
- Light foot traffic: About 4 days at 50°F and about 36 hours at 86°F.
- Normal use: About 7 days at 50°F and about 4 days at 86°F.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Sika Sikafloor-219 UTE
- Variant
- Two-part epoxy floor coating
- Region
- US
- Listed use
- floor coating, industrial floors, epoxy coating
- Timed stages recorded
- tooling, recoat max, recoat min, light foot, normal use
- Source checked
- 2026-10-25
Documentation: Official product page · Product page tables, retrieved 2026-10-26
Condition attached to the stated time: The source gives no conditions for this time.
About this product
A slower epoxy than Sikafloor-264. Its recoat opens at about 24 hours at 73°F instead of 8, and the page lists normal traffic at about 5 days instead of a full cure time.
Using this specific product
Sika Sikafloor-219 UTE is listed here as the Two-part epoxy floor coating version for floor coating, industrial floors, and epoxy coating. For installing or finishing a floor, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Two-part epoxy floor coating; related versions can use different timing.
- For floor coating, industrial floors, and epoxy coating, pay particular attention to subfloor condition, trowel coverage, room temperature and traffic plan.
- The source gives no conditions for this time. About 72 hours at 50°F and about 24 hours at 86°F. About 48 hours at 50°F and about 16 hours at 86°F. About 4 days at 50°F and about 36 hours at 86°F. About 7 days at 50°F and about 4 days at 86°F.
How to check readiness
Test the least-ventilated area before walking, covering or replacing furniture. The product page gives a pot life of about 26 minutes at 73°F. The product page gives a maximum recoat of about 36 hours at 73°F. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required.
Avoid this mistake
Foot traffic, furniture and rugs can have different return times.
Compare with similar products
- Compare with Rust-Oleum EpoxyShield MAXX 5300Recoat: 1 day there, 1 day here.
- Compare with Crown Floor PaintRecoat: 16 h there, 1 day here.
Questions
How long before you can recoat this product?
Sika states: The product page gives a pot life of about 26 minutes at 73°F. Conditions: The source gives no conditions for this time.. The product page gives a maximum recoat of about 36 hours at 73°F. Conditions: About 72 hours at 50°F and about 24 hours at 86°F.. The product page gives a minimum recoat of about 24 hours at 73°F. Conditions: About 48 hours at 50°F and about 16 hours at 86°F.. The product page gives about 2 days to light traffic at 73°F. Conditions: About 4 days at 50°F and about 36 hours at 86°F.. The product page gives about 5 days to normal traffic at 73°F. Conditions: About 7 days at 50°F and about 4 days at 86°F.. These are the manufacturer’s stated times, not a guarantee.
Why does Sikafloor-219 UTE wait so much longer to recoat than Sikafloor-264?
The product pages say so: 219 UTE gives about 24 to 36 hours at 73°F, while 264 gives 8 to 24 hours at 68°F. The 219 UTE page lists normal traffic after about 5 days at 73°F and does not give a full-cure time.
How long do I have to work with this product?
Sika states: The product page gives a pot life of about 26 minutes at 73°F. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
How long before I can walk on tile set with this product?
Sika states: The product page gives about 2 days to light traffic at 73°F. Conditions: About 4 days at 50°F and about 36 hours at 86°F.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Pot life, recoat and traffic times depend on temperature and film thickness. Follow the current data sheet. Follow the product label for your conditions.