Soloplan 201353
Self-levelling floor compound · EU · manufacturer-sourced
How long before you can tile over Schomburg Soloplan 201353?
Short answer
Return-to-use gates
Walk, furniture and full traffic open at different times
- Apply the Self-levelling floor compound to a clean, dry subfloor
- Stay off until the foot-traffic time
- Bring in furniture and heavy use later
This product’s stated stages Quoted at 73°F
- Working time ends30 minutes
- Light foot traffic3 hours
- Ready for tile4 hours
Worth noticing: Working time is only 30 minutes; the next stated stage, light foot traffic, is 3 hours.
Common mistake: Moving furniture back the day after, while the surface is still soft.
Return-to-use gates
Open the surface gradually instead of treating cure as one moment
Time returning to use
Your countdown
Stated times
- Working time ends30 minutes
- Ready for tile4 hours
- Light foot traffic3 hours
From Schomburg data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: cdn.shopify.com
Conditions & fine print
- Stated conditions: 73°F (23°C)
- Floor times assume the stated temperature and humidity. Cold slabs, thick coats and damp subfloors lengthen them. Follow the current data sheet.
- Region EU. Formulas can differ between countries; check your container.
- Working time ends: The source gives no conditions for this time.
- Ready for tile: The source gives no conditions for this time.
- Light foot traffic: The source gives no conditions for this time.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Schomburg Soloplan 201353
- Variant
- Self-levelling floor compound
- Region
- EU
- Listed use
- floor levelling
- Timed stages recorded
- tooling, tile ready, light foot
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Technical data sheet, 30 January 2025
Condition attached to the stated time: The source gives no conditions for this time.
About this product
A German-made leveller with a 30 minute pot life, foot traffic at 3 hours and tiling at 4.
Using this specific product
Schomburg Soloplan 201353 is listed here as the Self-levelling floor compound version for floor levelling. For installing or finishing a floor, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Self-levelling floor compound; related versions can use different timing.
- For floor levelling, pay particular attention to subfloor condition, trowel coverage, room temperature and traffic plan.
- The source gives no conditions for this time.
How to check readiness
Test the least-ventilated area before walking, covering or replacing furniture. The sheet gives a pot life of 30 minutes. The sheet gives tiling after 4 hours. Try a protected edge first and avoid turning, dragging or concentrated loads.
Avoid this mistake
Foot traffic, furniture and rugs can have different return times.
Compare with similar products
- Compare with Remmers Screed Fast-Hardening Cement 2814Light foot traffic: 3 h there, 3 h here.
- Compare with LATICRETE SPARTACOTE FLEX XPLLight foot traffic: 3–4 h there, 3 h here.
Questions
How long before you can tile over this product?
Schomburg states: The sheet gives a pot life of 30 minutes. Conditions: The source gives no conditions for this time.. The sheet gives tiling after 4 hours. Conditions: The source gives no conditions for this time.. The sheet gives foot traffic after 3 hours. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
Can I tile over Soloplan 201353 the same day?
The sheet gives 4 hours before tiling.
How long do I have to work with this product?
Schomburg states: The sheet gives a pot life of 30 minutes. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
How long before I can walk on tile set with this product?
Schomburg states: The sheet gives foot traffic after 3 hours. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Floor times assume the stated temperature and humidity. Cold slabs, thick coats and damp subfloors lengthen them. Follow the current data sheet. Follow the product label for your conditions.